Victory Carbon Trad Carbon ShaftsItem Number: 681501X
Victory Archery is one of the innovators in micro-diameter carbon shafting. The Carbon Trad line adds Victory's exclusive, ground-breaking ICE™ Nano Ceramic coating.
Victory Carbon Trad arrow shafts feature a micro-diameter carbon core with an infused natural, woven linen fiber outer layer for the look and feel of natural wood, but with the durability, accuracy, and precision of carbon.
The ICE™ nano ceramic coating is the slickest arrow coating available for improved penetration and easier target removal.
The SHOK® Outsert Technology features a 7075 hard adonized stainless steel outsert with standard 8/32 thread and 5/16" diameter. This adds penetrating power to an arrow shaft that's already at 11 on the deadly scale!
Every 6-pack is spine aligned and weight matched to ±1 gr for consistent shooting. All spines measure 31¼" with an inside diameter of .204".
Installed with Bohning A nock (7 gr) and includes stainless steel outserts (80 gr, adds ½" to overall length and feature a built-in reinforcement collar). Straightness: Gamer ±.003" OR Sport ±.006". Recommended field point: 5/16". Choose (spine/GPI): 650/10.1, 550/10.5, 450/10.7, or 350/11.2.
Please Note: Victory Carbon Trad Gamer and Sport Shafts use a RIP SHOK outsert that adds ½" to the overall length of the shaft. For example, if you order 30" shafts, they will be cut to 30" and the finished shaft with outsert installed will be 30 ½" from the valley of the nock to the end of the insert.Victory Carbon Trad Carbon Shafting Specifics
|Straightness Gamer ±.003" or Sport ±.006" Weight ±1gr|
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".
Install Inserts: Choose this option to have our experts install your Aluminum Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.