If you demand speed, precision, and versatility, then Easton 5.0 Match Grade arrow shafts are built for you!
With a lightweight, small-diameter design, these arrows cut through wind resistance while delivering deep penetration on impact. Whether you're chasing high-velocity setups or dialing in a heavy front-of-center (FOC) build, the Easton 5.0 provides the flexibility to fine-tune your arrows for any hunt.
Constructed in the USA with Easton's seamless Acu-Carbon technology, these shafts ensure unmatched consistency in weight and spine. The high-modulus carbon fiber construction keeps them durable and straight, meeting an impressive ±.001" straightness standard.
Available in six spine options, the Easton 5.0 adapts to virtually any bow setup. It also features the new 5MM Microlite™ Nock System for improved string fit and tunability, along with HIT inserts and collars for rock-solid broadhead alignment.
Get ready to send arrows that fly truer, hit harder,and perform when it counts.
Sold by the 12-pack. Available in 200, 250, 300, 340, 400, and 500 spine. Please specify.
- Deflections of 200, 250, 300, 340, 400, and 500
- Sold by the 12-pack
- 5MM high-modulus lightweight carbon fiber with Acu-Carbon construction
- NEW Microlite 5MM nocks
- 5MM HIT inserts included
- HIT Collars included
- Straightness: +/- .001”
- .204" Inside Diameter
| Easton 5.0 Match Grade Carbon Shafting Specifics | ||||||||
|---|---|---|---|---|---|---|---|---|
| Spine | Point | GPI | Length | ID | OD | Insert | Nock | Collar |
| 200 | 9/32" | 10.6 | 33-3/4" | 0.204" | 0.273" | 15 gr | Microlite 5MM | HIT Collar |
| 250 | 9/32" | 9.5 | 33-1/4" | 0.204" | 0.270" | 15 gr | Microlite 5MM | HIT Collar |
| 300 | 17/64" | 8.4 | 32-3/4" | 0.204" | 0.264" | 15 gr | Microlite 5MM | HIT Collar |
| 340 | 17/64" | 7.5 | 32-1/4" | 0.204" | 0.258" | 15 gr | Microlite 5MM | HIT Collar |
| 400 | 17/64" | 6.8 | 31-3/4" | 0.204" | 0.253" | 15 gr | Microlite 5MM | HIT Collar |
| 500 | 17/64" | 6.2 | 31-1/4" | 0.204" | 0.249" | 15 gr | Microlite 5MM | HIT Collar |
| Straightness ±.001" Weight ±1 grains | ||||||||
Services Available Any service requested may delay shipment. Items with services applied are non-refundable.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the valley of the nock to the end of the shaft. Minimum length is 27". Tolerance for cut length is ±1/16".
Install Point Inserts: Choose this option to have our experts install your Point Inserts in your shafts. We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent. If you want us to use different inserts or adapters (i.e. brass point inserts), please put a comment on your order during checkout referencing what item numbers to use together.
Standard Fletch: Our experienced fletchers will 3-fletch your arrow shafting with 5" shield left wing turkey feathers. The cock feather will be traditional barred and the two hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
Get the Newsletter
