Target practice is over. It's time to get down to business, and your business is bringing home meat. Black Eagle Rampage carbon arrow shafts are built to go faster and further to bring down big game.
The .204" micro diameter means thick 100% carbon walls, deeper penetration, and less wind drift. This is the ideal carbon shaft for taking on tough game. Get the kind of legendary pass-throughs you only see on hunting shows or read about in books. Hit the bull's eye shot after shot, till your buddies groan with envy and the target falls apart.
Real archers don't settle for "good enough." They squeeze every ounce of performance out of their arrows. Rampage carbon arrow shafts crank that performance up to the edge of impossible.
Get back in business with Rampage carbon arrow shafts. Sold in spines of 400, 350, 300, 250, and 150. Fl orange "R" nocks installed. Rampage-Renegade Half-Out inserts included (except with 150 spine), but not installed. Available in 6-packs and dozens. Please specify.
-
Features
- Straightness: 0.003"
- Weight: ±1 grains
- 5MM micro diameter
- Spines of 400, 350, 300, 250, 150
- Sold by the 6-pack and 12-pack
| Deflection/Spine | Point | GPI | Length | Insert | Nock | Collar |
| 400 | 17/64" | 7 | 32¼" | Stainless Steel Bone Crusher Half-Out | R Nocks | -- |
| 350 | 9/32" | 8.2 | 32¼" | Stainless Steel Bone Crusher Half-Out | R Nocks | E |
| 300 | 9/32" | 8.7 | 32¼" | Stainless Steel Bone Crusher Half-Out | R Nocks | -- |
| 250 | 9/32" | 10.7 | 32¼" | Stainless Steel Bone Crusher Half-Out | R Nocks | A |
| 150 | 9/32" | 16 | 32¼" | Platinum Bone Crusher Half-Out | R Nocks | -- |
| Tolerances Straightness: 0.003" Weight: ±1 grains |
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Services Available
Standard Fletch: Our experienced fletchers will 3-fletch your Black Eagle Rampage Carbon Shafts with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".
Install Inserts: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
See Printable Shaft Selection Chart PDF
Get the Newsletter
