


A classic camo style with precision and strength, in a long list of available spines. Super strong 96,000 psi (pounds per square inch) 7075-T9 alloy with hard anodized 4-tone camo and easy draw finish. Aluminum UNI bushings and nocks installed, inserts included. 1816 and 1916 models use X nock, other models use Super nock.
- 4-tone camo easy draw finish
- 7075-T9 Alloy, 96,000 psi
- Adjustable nock alignment with UNI bushing
- "X" or Super nock installed, inserts included
- Sold by the dozen only
Model (Spine) | Point | GPI | Length | Insert | Nock |
1816 (.756") | 9/32" | 9.3 | 30" | 12gr | X |
1916 (.623") | 9/32" | 10.0 | 31" | 16gr | X |
2013 (.610") | 5/16" | 9.0 | 32-3/8" | 21gr | Super |
2016 (.531") | 5/16" | 10.6 | 32" | 20gr | Super |
2018 (.464") | 5/16" | 12.3 | 30-3/8" | 19gr | Super |
2114 (.510") | 21/64" | 9.9 | 31-1/8" | 25gr | Super |
2117 (.407") | 21/64" | 12 | 31-3/8" | 25gr | Super |
2213 (.458") | 11/32" | 9.8 | 31-3/8" | 30gr | Super |
2215 (.419") | 11/32" | 10.7 | 31½" | 30gr | Super |
2216 (.376") | 11/32" | 12.0 | 31¾" | 29gr | Super |
2219 (.337") | 11/32" | 13.8 | 32" | 26gr | Super |
2314 (.391") | 11/32" | 10.7 | 32" | 34gr | Super |
2315 (.342") | 11/32" | 11.7 | 32¼" | 37gr | Super |
2317 (.297") | 11/32" | 13.3 | 32-1/8" | 37gr | Super |
2413 (.365") | 11/32" | 10.4 | 32-1/8" | 40gr | Super |
Straightness: ±.002" Weight: ±1% Length ±½" |
As a note, the inserts for the 1816 model have delicate threads. Take extra care to not crossthread when screwing in a point.
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Services Available
Standard Fletch: Our experienced fletchers will 3-fletch your Easton XX75 Camo Hunter® Aluminum Shafting with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27 ½".
Install Inserts: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
See Printable Shaft Selection Chart PDF