Easton T64 FMJ Tapered Carbon Arrow ShaftsItem Number: 67422X
Big game doesn't go down easy. You need the perfect combination of FOC (front of center) weight and accuracy. Easton Archery brings you the best of both with their T64 Full Metal Jacket arrow shafts!
These tapered carbon arrow shafts are called T64 because they have a 6mm diameter at the point end that seamlessly tapers down to a 4mm micro-diameter at the nock end. Giving you an additional 30% FOC weight without adding point weight, allowing for better long-range accuracy. The micro-diameter taper at the nock end grants maximum penetration due to less friction on pass through.
Tapered carbon arrow shafts also have greater fletching clearance for faster shot recovery and less wind drag. This transfers more of the bow's kinetic energy to the arrow for better speed and improved accuracy.
Like all Full Metal Jacket carbon arrow shafts, the T64 utilizes a high-strength N-FUSED® carbon core bonded to a precision 7075 alloy jacket. The alloy finish allows for easier removal from targets.
Full Metal Jackets have had years of success in the field, taking down big game all over the world. This new design combines FOC and accuracy for even more killing power.
T64 Full Metal Jackets are straightened to the highest industry specifications. Easton has coaxially aligned these carbon shafts to ±3 milliradian, making it the most precise hunting arrow on the market today. Uses standard components (6mm for point end, 4mm for nock end).
Available in 310 or 375 spine. Please specify.
- Please Note:
- Cutting from the front end of the shaft will weaken the spine, (max cut line is laser etched on front of shaft).
- Cutting from the nock end of the shaft will stiffen the spine (no cut limit from back).
Comes with Deep Six Nocks (6 grains) and 6MM 8-32 RPS Inserts. Sold by the 6-pack.
|7.9 (310)||9/32"||13.3 avg/16.3 front/11.3 rear||32"||Easton ST||Deep 6/G|
|9.5 (375)||9/32"||12.2 avg/14.0 front/11.2 rear||30"||Easton ST||Deep 6/G|
|Tolerances Straightness: ±3 milliradian Weight: ±2 grains|
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Standard Fletch: Our experienced fletchers will 3-fletch your Easton T64 Full Metal Jacket™ Carbon Shafts with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".
Install Inserts: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder