Victory Archery's Rival carbon arrow shaft is built for archers who want one arrow to do it all—tournament lines, backyard practice, and the moment of truth in the field.
Powered by Victory’s MaxxKe™ Technology, Rival uses an advanced 1.5K carbon weave to deliver exceptional strength, durability, and reduced overall grain weight for a flatter trajectory and confident accuracy at longer distances.
0.225" Inside Diameter offers reduced wind drift and improved durability over standard shafts, while remaining easier to tune and lighter in overall system weight than ultra-micro diameter arrows.
That lighter, stronger build means faster recovery out of the bow, less torque, and a cleaner flight path shot after shot. The result? Tighter groups, more forgiveness, and consistency you can trust when precision matters most.
Rival carbon arrow shafts come installed with nock bushings (7 grains) and AAE IP 5 nocks (0.204" ID nocks), and include stainless steel inserts (30 grains) and 20 grain 0.204" ID back weights.
Rival Features:
- Advanced 1.5K™ Carbon Weave – Reduces torque, increases durability, and promotes faster arrow recovery for improved accuracy
- 90° Carbon Weave Pattern – Enhances uniform spine consistency and overall structural strength
- Digitally Spine Aligned – Every arrow is digitally aligned for superior shot-to-shot consistency
- Precision Weight Matched – Each 6-pack is matched to ±0.5 grains for tighter grouping and repeatable performance
Whether you’re dialing in a long-distance setup or demanding dependable performance across multiple disciplines, Victory Rival X arrows deliver speed, consistency, and versatility—right where you need it.
Sold in 6-packs and 12-packs (two 6-packs). Available in spines of 300, 350, 400, and 500. Please specify.
| Victory Rival Carbon Shafting Specifics | |||||||
| Spine | Inside Diameter (ID) | Point | GPI | Length | Insert | Nock | Outside Diameter (OD) |
| 250 | 0.225" | 9/32" | 9.6 | 32" | 30 grains | AAE IP 5 | 0.286" |
| 300 | 0.225" | 9/32" | 8.6 | 32" | 30 grains | AAE IP 5 | 0.281" |
| 350 | 0.225" | 9/32" | 8.1 | 32" | 30 grains | AAE IP 5 | 0.278" |
| 400 | 0.225" | 9/32" | 7.1 | 32" | 30 grains | AAE IP 5 | 0.272" |
| 500 | 0.225" | 9/32" | 6.9 | 32" | 30 grains | AAE IP 5 | 0.271" |
| Straightness ±.005" Weight ±1 grain | |||||||
Services Available Any service requested may delay shipment. Items with services applied are non-refundable.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the valley of the nock to the end of the shaft. Minimum length is 27". Tolerance for cut length is ±1/16".
Install Point Inserts: Choose this option to have our experts install your Point Inserts in your shafts. We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent. If you want us to use different inserts or adapters (i.e. brass point inserts), please put a comment on your order during checkout referencing what item numbers to use together.
Standard Fletch: Our experienced fletchers will 3-fletch your arrow shafting with 5" shield left wing turkey feathers. The cock feather will be traditional barred and the two hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
Get the Newsletter
