TopHat® Screw-On Classic 3D Brass Field Point 6-packItem Number: 0933X
Brass saves shafts! These TopHat® Screw-On Classic 3D Brass Points are perfect for preserving your wooden arrows. The brass material is softer and more forgiving than other metals, which decreases the possibility of damage on the arrow.
Specially designed for 3D targets, the Screw-On Classic 3D Brass Point enters the target more aggressively than other points. The shape of the head provides less tension and resistance in flight, and provides more protection for the wooden arrow. The special design of the 3D Brass Point also prevents rebound on the surface of the target. The conical area in the inner front of the head allows the arrow to center perfectly, leading to improved flight-characteristics and pinpoint accuracy.
The head diameter is broader than the shaft, causing expansion at the point of entry, which makes removal of arrows from targets noticeably easier.
The TopHat® Classic 3D Brass Point is innovative and unique. The arrow point is threaded onto the blunt shaft (no glue or taper required). The thread inside the arrow point attaches firmly to the shaft, making accidental loosening impossible.
Available in 5/16" - 70, 100, and 125 grains, and 11/32" - 100 and 125 grains. Please specify. Sold by the 6 pack.
Please note: It is recommended that you buy the TopHat® Thread Cutting Tool, TopHat® Shaft Shaper, and TopHat® Assembly Tool to use with these points.
The TopHat® Thread Cutting Tool is for starting a thread onto the shaft to make it easier to install Screw-On points. The TopHat® Shaft Shaper is for compressing down an oversized shaft so the finish will not be marred when installing points, and to allow the points to go on easier. The TopHat® Assembly Tool is for gripping the point, the Thread Cutting Tool and The Shaft Shaper without marring them for easy tightening and removal of TopHat® points.