Born from the fusion of Taiga and Uukha, the Taïkha riser delivers a seamless blend of authentic traditional archery feel and cutting-edge carbon performance.
You’ve been asking for it for years—and now it’s finally here.
At 19", the Taïkha is compact, agile, and purpose-built for instinctive shooting. Light in the hand and rock-solid at full draw, it offers exceptional stability and precision whether you’re navigating the woods or dialing in tight groups on the range.
Takedown System:
Features an ILF (International Limb Fitting) system, providing compatibility with a wide range of ILF limbs and allowing for easy setup, tuning, and transport.
Riser:
Constructed from 100% ultra-fine, high-strength carbon fibers, the Taïkha follows the design philosophy of the Xpro3 and utilizes Uukha’s proprietary Monolith Carbon technology—a manufacturing process unique on the market. Reinforced 7075 aluminum hardware ensures long-term durability and reliability in all shooting conditions.
The riser’s controlled deflex geometry and high torsional rigidity promote efficient energy transfer, excellent stability at full draw, and improved shot consistency.
Designed with a cut-past-center sight window, the Taïkha positions the arrow for optimal alignment, minimizing parallax and enhancing accuracy for both off-the-shelf and elevated rest shooting.
A matte finish and two integrated damping plates between the riser and limb pockets significantly reduce noise and vibration, resulting in a smoother, quieter shot.
An optimized shelf radius supports true off-the-shelf shooting, placing the arrow close to the hand for a natural feel and consistent release.
- Weight: Approximately 2.26 lbs
- Grip: Comes with a factory-installed grip and features an interchangeable grip system (7 grip options available, sold separately) for a fully customized fit
Graduated tiller bolts allow ±5% adjustment from the mid position when paired with compatible ILF limbs, giving archers precise control over bow tuning.
Includes three interchangeable center shot plates to adjust arrow position relative to the sight window for precise tuning—ideal for dialing in both off-the-shelf and elevated rest setups.
Features multiple threaded accessory bushings for maximum versatility, including two #10-24 bushings, one 5/16"-24 stabilizer bushing, and one 5/16"-24 plunger bushing for mounting a plunger, elevated rest, stabilizer, or bow quiver.
Includes:
Riser with installed grip, (3) center shot plates, adhesive arrow rest pad, riser sleeve with drawstring closure, and Allen wrench set. Limbs and string sold separately.
Available Options:
Right or left hand. Please specify.
Choose from a left or right handed bow (choose based on what hand you Draw the bow string with), and bow weight at a 28" draw length. Remember that with a traditional bow the weight will change depending upon what your draw length is. Bow weight will change approximately ±2½ pounds for every inch from a bows rated draw length. So a bow rated 45# @ 28" bow is roughly a 42½# @ 27" or 47½# @ 29". Draw weight is marked at the nearest 5# increment to actual weight, (2#'s under and 3#'s over). This is an industry wide standard.
Minimum Arrow Weight - Do not shoot an arrow weighing less than eight grains for every pound of peak draw weight. For example: If your bow's peak weight is 40 pounds at your 30" draw length, do not shoot an arrow weighing less than 320 grains total arrow weight (40# x 8 gpp = 320 grains). Shooting an arrow below eight grains per pound (gpp) can cause damage to your bow similar to dry firing and possible injury to the shooter or others nearby. Damage caused by shooting an arrow that is too light will damage the bow and will not be covered under warranty by 3Rivers Archery or bow manufacturer.
Typically with ILF bows the weight will adjust up or down 2# for every 2" of riser length. For example, if a pair of limbs is 40# on a 17" riser, they will be 42# on a 15" riser or 38# on a 19" riser. This is standard for all ILF risers and limbs.
Draw weight is marked at the nearest 5# increment to actual weight, (2#'s under and 3#'s over). This is an industry wide standard.
Bow stringer not included. A bow stringer is recommended for stringing any recurve bow or longbow. Stringing a bow without a bow stringer, or stringing it backwards will void a bow's warranty. Click here to see our Bow Stringers. It is recommended to unstring your bow if you do not plan to be shooting more than week. Store your bow on its side, or hanging vertically from a peg. Never rest the bow on the lower tip for extended periods of time. Never dry fire the bow (shooting without an arrow).
Let us set up your bow for you with our 3Rivers Bow Set-up Service
Read about Longbow and Recurve Set-up on our blog.
Get the Newsletter
![](https://pinterest.com/pin/create/button/?url=https://www.3riversarchery.com/uukha-taikha-takedown-ilf-riser.html&description=Check out the deal on Uukha Taïkha 19" ILF Traditional Riser at 3Rivers Archery Supply&media=https://www.3riversarchery.com/mm5/graphics/00000001/816910X.webp){kind=link}