Experience the seamless fusion of wood and carbon in the Samick Discovery R1 recurve limbs. Engineered for exceptional performance, these limbs deliver a smooth and reliable shooting experience. Crafted with a dual maple wood core and reinforced by carbon lamination, they guarantee durability and precision for your DAS or ILF bow.
The Samick R1 limbs are surrounded by sturdy black fiberglass, providing the necessary strength for consistent and accurate shooting. Whether you're a seasoned archer or just starting out, these limbs offer a perfect blend of craftsmanship and performance to enhance your shooting experience.
Samick uses two laminations of maple in the core of these limbs to get exceptional performance at incredibly smooth draws. The carbon strip offers rigidity to prevent lateral movement during the shot, and faster recovery after the shot. Making your limb perform at its best on every shot. Offered in both DAS limb connection and ILF limb connection forthe versatility of using with the large selection of DAS and ILF bow risers.
Combining these elements with the solid phenolic wedge, reinforced tips for using with high performance bow strings, and a stealthy matte finish you have an extremely efficient and effective hunting limb in all conditions.
Choose the limb length of Medium (60" on a 17" riser) or Long (62" on a 17" riser), the pull weights of 30#, 35#, 40#, 45#, 50#, and 55# @ 28" draw (measured on a 17" riser), and the limb connection of DAS or ILF.
Remember that with a traditional bow the weight will change depending upon what your draw length is. Bow weight will change approximately ±2½ pounds for every inch from a bows rated draw length. So a bow rated 45# @ 28" bow is roughly a 42½# @ 27" or 47½# @ 29". Draw weight is marked at the nearest 5# increment to actual weight, (2#'s under and 3#'s over). This is an industry wide standard.
Read about Longbow and Recurve Set-up
See Samick Discovery R3 Foam Core Recurve Limbs
Get the Newsletter
