Easton Full Metal Jacket™ carbon shafts are heavier mass weight and micro X diameter for bone-crushing, extra knockdown power on big game. Utilizing a high-strength N-FUSED® carbon core bonded to a precision 7075 alloy jacket. When going after big game do not leave anything to chance.

The micro X diameter makes the FMJ™ deeper penetration and dramatically reduces wind drift. The X diameter also offers 24% more Kinetic Energy Density over conventional 5/16" diameter carbon shafts. MORE KE Density = MORE Penetration. The alloy finish makes for easier target removal. Included HIT inserts give tighter groups and better broadhead alignment. X nocks are installed (FMJ™ have fl-green, Dangerous Game™ have fl-orange).

Compatible with Deep Six components. Deep Six is a new standard in high performance inserts and points for bowhunting. Get increased kinetic energy downrange and extreme crosswind resistance.

The FMJ™ Dangerous Game are the "Top in Class" for hunting the largest and thickest skinned of big game animals. More mass weight to crush bone and plow through big game. Do not leave your hunt of a lifetime to chance. Be sure to have the best penetrating arrow on your bow when the shot comes. Use FMJ Dangerous Game where large, heavy game requires high-power arrows.

Both the Axis Full Metal Jacket™ and Axis Full Metal Jacket™ Dangerous Game feature a Black Diamond plate pattern.

Easton Axis Full Metal Jacket™

Spine	Point	GPI	Length	Insert	Nock	Point Collar	Nock Collar
500	9/32"	9.1	31"	16 gr	X	E	--
400	9/32"	10.2	31½"	16 gr	X	F	--
340	9/32"	11.3	32"	16 gr	X	F	--
300	9/32"	12	32½"	16 gr	X	G	--

Straightness ±.002" Weight ±2 gr

Easton Axis Full Metal Jacket™ Dangerous Game

Spine	Point	GPI	Length	Insert	Nock	Point Collar	Nock Collar
300	9/32"	16	32"	75-50 gr	X	--	--
250	9/32"	17.7	32½"	75-50 gr	X	--	--

Straightness ±.002" Weight ±2 gr

Services Available
Standard Fletch: Our experienced fletchers will 3-fletch your Easton N-Fused Axis Full Metal Jacket™ Carbon Shafting with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.

Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27½".

Install Point Inserts: Choose this option to have our experts install your HIT point inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.

If you prefer to customize your shaft with additional options, please use our Arrow Builder

See Printable Shaft Selection Chart PDF

See 3Rivers Archery Weight Tubes

FMJ 5MM Shafts Black Diamond - 400 (6 pack)

Tell A Friend

Get the Newsletter