DAS 3K Carbon Foam Core Recurve LimbsItem Number: 816835X
Whether you're looking for more or less, DAS™ delivers! 3K Carbon Foam Core Limbs give you more stability and less vibration.
By surrounding a foam core with lightweight 3K carbon, DAS™ has created lighter limbs that are less affected by weather and temperature. 3K carbon is considered the "workhorse" of carbon fibers due to its lighter weight and relative stiffness as compared to other carbon fibers. Foam is known for its resilience and resistance to the elements.
Pair these powerful recurve limbs with any DAS™ or ILF riser for an unbeatable bow. Recurve limbs give you a more compact bow, with the added advantages of speed and accuracy.
The reinforced tips let you shoot with today's high performance bow strings. Comes with felt-lined limb sleeves with Velcro® closure for storage.
Offered in both DAS™ limb connection and ILF limb connection for the versatility of using with the large selection of DAS™ and ILF bow risers.
Choose the limb length of Short (58" on 17" riser), Medium (60" on 17" riser), or Long (62" on 17" riser) in pull weights of 29#, 35#, 40#, 45#, 50#, 55#, or 60# @ 28" (measured on a 17" riser), and the limb connection of DAS™ or ILF.
- Limbs feature a foam core surrounded by 3K carbon
- Reinforced limb tips
- Available in Short, Medium, and Long in pull weights of 29#-60#
- Choose DAS™ or ILF limb connection
Minimum Arrow Weight - Do not shoot an arrow weighing less than eight grains for every pound of peak draw weight. For example: If your bow's peak weight is 40 pounds at your 30" draw length, do not shoot an arrow weighing less than 320 grains total arrow weight (40# x 8 gpp = 320 grains). Shooting an arrow below eight grains per pound (gpp) can cause damage to your bow similar to dry firing and possible injury to the shooter or others nearby. Damage caused by shooting an arrow that is too light will damage the bow and will not be covered under warranty by 3Rivers Archery or bow manufacturer.
Choose from a left or right handed bow (choose based on what hand you Draw the bow string with), and bow weight at a 28" draw length. Remember that with a traditional bow the weight will change depending upon what your draw length is. Bow weight will change approximately ±2½ pounds for every inch from a bows rated draw length. So a bow rated 45# @ 28" bow is roughly a 42½# @ 27" or 47½# @ 29". Draw weight is marked at the nearest 5# increment to actual weight, (2#'s under and 3#'s over). This is an industry wide standard.
Typically with ILF bows the weight will adjust up or down 2# for every 2" of riser length. For example, if a pair of limbs is 40# on a 17" riser, they will be 42# on a 15" riser or 38# on a 19" riser. This is standard for all ILF risers and limbs.