Easton N-Fused Axis Full Metal Jacket™ Carbon Shafts Item Number: 6742X
$74.99
Made in the US
Easton N-Fused Axis Full Metal Jacketâ„¢ Carbon Shafts

Easton N-Fused Axis Full Metal Jacket™ Carbon Shafts

Item Number: 6742X
Loading
$74.99 $74.99
Made in the US


 
In Stock


Easton Full Metal Jacket™ carbon shafts are heavier mass weight and micro X diameter for bone-crushing, extra knockdown power on big game. Utilizing a high-strength N-FUSED® carbon core bonded to a precision 7075 alloy jacket. When going after big game do not leave anything to chance.

The micro X diameter makes the FMJ™ deeper penetration and dramatically reduces wind drift. The X diameter also offers 24% more Kinetic Energy Density over conventional 5/16" diameter carbon shafts. MORE KE Density = MORE Penetration. The alloy finish makes for easier target removal. Included HIT inserts give tighter groups and better broadhead alignment. X nocks are installed (FMJ™ have fl-green, Dangerous Game™ have fl-orange).

Compatible with Deep Six components. Deep Six is a new standard in high performance inserts and points for bowhunting. Get increased kinetic energy downrange and extreme crosswind resistance.

The FMJ™ Dangerous Game™ are the "Top in Class" for hunting the largest and thickest skinned of big game animals. More mass weight to crush bone and plow through big game. Do not leave your hunt of a lifetime to chance. Be sure to have the best penetrating arrow on your bow when the shot comes. Use FMJ Dangerous Game where large, heavy game requires high-power arrows.

Both the Axis Full Metal Jacket™ and Axis Full Metal Jacket™ Dangerous Game feature a Black Diamond plate pattern.

Easton Axis Full Metal Jacket™
Spine Point GPI Length Insert Nock Point
Collar
Nock
Collar
500 9/32" 9.1 31" 16gr X E --
400 9/32" 10.2 31½" 16gr X F --
340 9/32" 11.3 32" 16gr X F --
300 9/32" 12 32½" 16gr X H --
Straightness ±.002"        Weight ±2gr

Easton Axis Full Metal Jacket™ Dangerous Game
Spine Point GPI Length Insert Nock Point
Collar
Nock
Collar
300 9/32" 15.5 32" 75-50gr X -- --
250 9/32" 17.2 32½" 75-50gr X -- --
Straightness ±.002"        Weight ±2gr


Services Available
Standard Fletch:  Our experienced fletchers will 3-fletch your Easton N-Fused Axis Full Metal Jacket™ Carbon Shafting with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.

Cut Shafts to Length:  Have your carbon arrows cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27 ½".

Install Point Inserts:  Choose this option to have our experts install your HIT point inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.

If you prefer to customize your shaft with additional options, please use our Arrow Whiz

See Printable Shaft Selection Chart PDF

See 3Rivers Archery Weight Tubes