They're the perfect combination of beauty and versatility. Gold Tip Traditional Classic carbon shafts feature jaw dropping beauty with their unique footed-wood grain finish. The included stainless steel inserts allow you to up your FOC (Front of Center) weight while still accepting Gold Tip Weights. For those who want to use these shafts with a G or F Nock, they are compatible with Gold Tip Accu Bushings. You can also purchase Gold Tip Ballistic Collars to reinforce your Classic shafts.
The skinny .204" ID gives you better penetration, less wind drift, and closer center shot for easier tuning.
Accu-Tough Nocks installed. Inserts included. Available in spines of 600, 500, 400, and 340 in 6-packs or dozens. Please specify.
Please Note: the Gold Tip Classic and Classic XT® use an outsert that adds ½" to the overall length of the shaft. For example, if you order 30" shafts, they will be cut to 30" and the finished shaft with outsert installed will be 30 ½" from the valley of the nock to the end of the insert.Gold Tip Traditional Classic Carbon Shafting Specifics
|400||9/32"||11.3||32"||78 gr||Accu-Tough||--||--||340||9/32"||12.0||32"||80 gr||Accu-Tough||--||--|
|Straightness ±.006" Weight ±2gr|
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Standard Fletch: Our experienced fletchers will 3-fletch your Gold Tip Traditional Classic Carbon Shafting with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
Cut Shafts to Length: Have your carbon shafts cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27½".
Install Inserts: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
3Rivers Weight Tubes - 9/32"
SKU: 0175X - Glory Nock
SKU: 6720X - Lumenok - X
SKU: 6725X - Nockturnal - X
SKU: 6755X - Easton X Nocks
SKU: 6682X - GT Accu Tough Nocks
Gold Tip Ballistic Collars
Brass Glue-In Broadhead
Adapters - 9/32"
Gold Tip Accu Bushing