Arrow Dynamics Stinger Black Carbon Shafts Item Number: 67872X
$57.50 $57.50
Made in the US
Arrow Dynamics Stinger Black Carbon Shafts

Arrow Dynamics Stinger Black Carbon Shafts

Item Number: 67872X
Loading
4
$57.50 $57.50
Made in the US


 
In Stock


Submit your email to be notified when back in-stock

Arrow Dynamics Stinger is a parallel-to-taper carbon shaft that utilizes conventional components. The tapered shaft creates better fletching clearance allowing for a quicker recovery from the paradox and translating more of the bow's kinetic energy to the arrow. This unique taper allows for more EFOC (Extreme Front of Center) weight without having to add weight tubes or heavyweight points. With EFOC you will see better penetration on big game, and tighter groups with pin-point accuracy. A full length bare shaft with a 145 grain point generates more than 20% EFOC.

The 100% carbon shaft is a .246" inside diameter at the point end for the first 13" and tapers to a .165" ID at the nock end. Includes 17 grain aluminum inserts and white Bohning 'F' nocks.

Point end works with all .246" components (such as 5/16" brass inserts) and the nock end works with Easton G nocks or Bohning F nocks. Sold by the 6-pack and 12-pack. Made in the USA.

  • .246" inside diameter for the first 13", then tapers to .165"
  • Made in USA
  • ±.003 straightness
  • Built in EFOC weight (extreme front of center)
  • Works with most popular 5/16" components
  • Good arrow flight through a wide range of bow weights with same spine arrow
  • Quick recovery due to parallel to taper design
  • Black Carbon Finish

Arrow Dynamics Stinger Carbon Shafting Specifics

Spine Point GPI Length Insert Nock Point
Collar
Nock
Collar
500 5/16" No GPI due to taper design
Roughly 310 grains @ 32½"
32½" 17 grains Bohning F Nock E --
400 5/16" No GPI due to taper design
Roughly 330 grains @ 32½"
32½" 17 grains Bohning F Nock C --
330 5/16" No GPI due to taper design
Roughly 358 grains @ 32½"
32½" 17 grains Bohning F Nock N --
Straightness  ±.003"     Weight  N/A

Additional Components
3Rivers Glue-In Target Points
SKU: 715-1
3R Glue-In Target Points
Brass Glue-In Broadhead Adapters
SKU: 4930X
Brass Glue-In BH Adapters - 5/16"
Easton Glue-In Target Points
SKU: 6793X
Easton CB Glue-In Target Points
Brass Inserts
SKU: 0255X - Brass Inserts - 5/16"
SKU: 6692-04X - Gold Tip Brass Inserts
Bohning Blazer F Nock
SKU: 0170X
Bohning Blazer F Nock®
Easton G Push-In Nocks
SKU: 6754X
Easton G Push-In Nocks