With a wide range of spines, Easton tough construction, and a slick new look, Traditional Only® Barebow carbon shafts are ready to take on any animal, meet any challenge, and survive any ordeal.
3Rivers Archery has partnered with Traditional Vision Quest and Easton Archery to produce a Traditional Only® arrow shaft with a .204" inside diameter. Add Easton's devastating half-out aluminum inserts for increased FOC (front of center) and you have an arrow shaft that strikes like lightning.
Features a solid white no-glare PhotoFusion™ finish with a durable clear coat that will not wear down or chip off with heavy use. This is a high visibility arrow for shot placement and easy arrow retrieval. The white finish makes this a particularly good arrow for "gap" shooters, allowing for better focus on the shaft end when at full draw.
The Barebow arrow experts at 3Rivers Archery and Traditional Vision Quest have tested, tested, and re-tested these shafts in all kinds of brutal conditions. These shafts have stood up to punishment that would make lesser shafts shatter. Not only have they survived undamaged, the PhotoFusion™ white finish and eye-grabbing graphics have remained intact as well.
The Traditional Only® brand stands for quality and exceptional performance. We don't put this name on just any product. But we proudly put it on these devastating arrows... just as you'll proudly put Traditional Only® Barebow carbon arrows in your quiver.
White Easton X nocks installed, and 25 grain aluminum half-out inserts included. The 700, 600, and 500 spine shafts use #1 5mm half-out inserts, and the 400, 340, 300, and 260 spines use #2 5mm half-out inserts.
For the BEST in durability, strength, and reinforcement, add Ethics Outserts (sold separately).Traditional Only® Barebow Carbon Shafting Specifics
|260||5/16"||12.3||34"||25 grains (size #2)||.285"||X||--||--|
|300||5/16"||11.5||33¼"||25 grains (size #2)||.279"||X||--||--|
|340||5/16"||10.3||33"||25 grains (size #2)||.275"||X||A||A|
|400||5/16"||9.8||32¾"||25 grains (size #2)||.279"||X||--||--|
|500||5/16"||8.9||32¾"||25 grains (size #1)||.262"||X||F*||--|
|600||5/16"||7.9||32½"||25 grains (size #1)||.260"||X||E**||--|
|700||5/16"||6.8||31½"||25 grains (size #1)||.263"||X||E*||--|
|Straightness±.006" Weight ±1 grain|
*Loose fit **Tight fit
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".
Install Inserts: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
Please read about Carbon Arrow Safety here.
Gold Tip Screw-In Weights - .204"
3Rivers Weight Tubes - 9/32"
SKU: 0175X - Glory Nock
SKU: 6720X - Lumenok - X
SKU: 6725X - Nockturnal - X
SKU: 6755X - Easton X Nocks
SKU: 6682X - GT Accu Tough Nocks
Brass Glue-In Broadhead
Adapters - 9/32"
SKU: 0255X - Brass Inserts - Axis
SKU: 6757-1 - Axis Break-off Inserts
Gold Tip Accu Bushing
SKU: 67591X - Easton Half-Out Inserts
SKU: 49151X - Ethics Adjustable Outserts