Carbon Express Heritage® Carbon Shafts are designed for the traditional bowhunter who wants the best of carbon arrow performance and toughness in an arrow that looks like natural wood. The Heritage carbon shafting features the world's toughest, quietest BuffTuff® construction to really take some abuse. Launchpad™ Precision Nocks are installed and aluminum inserts included.
Heritage® Carbon Shafts are sorted and weight matched with tolerances of ±2 grains.
All Heritage® Shafts are laser checked for straightness to within 1/10,000 of an inch. Carbon Express checks their Heritage® shafts to a straightness of ±.005" as a maximum, not an average.
Launchpad™ Precision Nocks offer controlled arrow release, better shaft alignment, and consistent accuracy shot after shot. Colors: 75 spine - Yellow; 90 spine - Lime; 150, 250, and 350 spines - Pearl.
Carbon Express Heritage® Carbon Shafting Specifics
- Traditional Look, Higher Standards
- Patented BuffTuff® Construction - The world's toughest and quietest carbon arrow finish
- Sorted and weight matched
- Laser checked for straightness
- All internal components - Launchpad™ Precision nocks installed, inserts included
|Model (Spine) ||ID ||Point ||GPI ||Length ||Insert ||Nock ||Point |
|75 (.670") ||.234 ||9/32" ||8.69 ||30 ¼" ||11gr ||Launchpad™ ||-- ||-- |
|90 (.588") ||.234 ||9/32" ||9.71 ||30 ¼" ||11gr ||Launchpad™ ||B ||B |
|150 (.495") ||.2445 ||5/16" ||10.11 ||32 ¾" ||11gr ||Launchpad™ ||D ||D |
|250 (.391") ||.2445 ||5/16" ||10.20 ||32 ¾" ||11gr ||Launchpad™ ||N ||N |
|350 (.324") ||.2445 ||5/16" ||11.45 ||32 ¾" ||11gr ||Launchpad™ ||-- ||-- |
| Straightness ±.005" Weight ±2gr|
Heritage 75 and 90 spine shafts are a smaller I.D. (.234) and can accept Easton HP 50/75 grain break off brass inserts
. Weight tubes are not offered for either the 75 or the 90 Heritage shafts/arrows.
We also offer 50 and 100 grain brass inserts (.2445 model), and 5/16" weight tubes will fit the 150, 250, and 350 Carbon Express Heritage shafts. Services Available Cut Shafts to Length
: Have your carbon shafts cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27½". Install Inserts
: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Whiz See Printable Shaft Selection Chart PDF