GrizzlyStik has teamed up with Victory Archery to deliver one of the best carbon shafts in the industry for bowhunting. The GrizzlyStik Momentum TDT shafts incorporate a thin diameter taper (TDT) with built in Forward of Center (FOC) weight. These shafts offer not only strength, but the accuracy and penetration needed for taking big game animals.
The inside measures as a .204" diameter shaft and is internally parallel allowing for universal components (like an Easton 5 MM Axis arrow). The exterior is a strong woven thick carbon wall that tapers a continuous .001" from point end to nock end.
Included is a tough insert/outsert for a stronger connection that allows a perfect alignment while strengthening the point end for hard bone-splitting hits. Combining the GrizzlyStik Momentum TDT shafts with other GrizzlyStik components like the Silver Flame Broadheads will give you the optimum hunting arrow combination.
Please note, the Momentum TDT insert/outsert adds ½" to the overall length of the shaft. For example, if you order 30" shafts, they will be cut to 30" and the finished shaft with outsert installed will be 30 ½" from the valley of the nock to the end of the insert.
|170||5/16"||459 gr||31"||70gr||Bohning "A" Nock|
|240||5/16"||357 gr||31"||70gr||Bohning "A" Nock|
|320||5/16"||323 gr||31"||70gr||Bohning "A" Nock|
|400||5/16"||273 gr||31"||70gr||Bohning "A" Nock|
|Straightness ±.003" Weight ± 1 gr|
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.Services Available
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27½".
Install Point Inserts: Choose this option to have our experts install your point inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
SKU: 69356X - GrizzlyStik Brass Weights
SKU: 6696X Gold Tip Screw-In Weights - .204"
3Rivers Weight Tubes - 9/32"
SKU: 0175X - Glory Nock
SKU: 6720X - Lumenok - X
SKU: 6729X - Nockturnal FIT
SKU: 6755X - Easton X Nocks
SKU: 6682X - GT Accu Tough Nocks
Brass Glue-In Broadhead
Adapters - 9/32"
SKU: 0255X - Brass Inserts - Axis
SKU: 6757-1 - Axis Break-off Inserts
Gold Tip Accu Bushing