


The Tribute shaft from Easton is a perfect stepping stone for beginning archers, or archers using lighter poundage bows. It offers durability, accuracy, and economy in a sturdy aluminum shaft.
Made from 7075 Aerospace alloy with a hard-anodized black finish, the Tribute is perfect for archers looking to graduate to higher performance shafts.
Sold by the dozen. Available in spines of 1716, 1816, 1916, or 2016. Please specify. Nocks, Inserts, and other components sold separately.
- Features:
- 7075 Aerospace alloy
- Hard-anodized black finish
- Straightness: ± .005"
- Weight tolerance: ± 2gr
- Strength (PSI): 90,000
- Precision-ground nock swage
- Components sold separately
As a note, the inserts for the 1816 model have delicate threads. Take extra care to not crossthread when screwing in a point.
Easton Tribute Aluminum Shafting SpecificsModel (Spine) | Point | GPI | Length | Insert | Nock |
1716 (880) | 9/32" | 9.0 | 29" | 1716 | 1/4" Glue-On Nock |
1816 (756) | 9/32" | 9.3 | 30" | 1816 | 9/32" Glue-On Nock |
1916 (623) | 9/32" | 10.0 | 31" | 1916 | 9/32" Glue-On Nock |
2016 (531) | 5/16" | 10.6 | 32" | 2016 | 5/16" Glue-On Nock |
Straightness ±.005" Weight ±2gr |
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Services Available
Standard Fletch: Our experienced fletchers will 3-fletch your Easton Tribute Shafts with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27½". If you need your shafts cut shorter please call.
Install Point Inserts: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
See Easton Tribute Pre-Fletched Arrows