Enjoy all the benefits of aluminum arrows, straightness, toughness and good mass weight in a natural wood arrow look. These are full length uncut XX75 "Legacy" shafts from Easton Archery. Bowhunters and target archery shooters have recognized the excellent shooting characteristics of Easton XX75's for more than 30 years. If you're looking for the benefits of aluminum arrows and prefer the look of wood, try the XX75 Easton Legacy today.
Available in: 1916, 2016, 2018, 2117, 2216, and 2219. Please order by shaft size. Sold by the six pack.
Now includes inserts.
Nocks not included.
- Wood pattern
- More than 30 years of service
- Sold by the 6 pack
- Full Diameter Taper Swage to accept conventional glue-on nock
Model (Aluminum Size) | Point | GPI | Length | Insert | Nock |
1916 | 9/32" | 10 | 31" | 15gr | Z Nock |
2016 | 5/16" | 10.6 | 32" | 23gr | 5/16" |
2018 | 5/16" | 12.3 | 30 3/8" | 22gr | 5/16" |
2117 | 21/64" | 12 | 31 3/8" | 29gr | 11/32" |
2216 | 11/32" | 12 | 31 ¾" | 34gr | 11/32" |
2219 | 11/32" | 13.8 | 32" | 31gr | 11/32" |
Straightness: ±.002" Weight: ±1% Length ±½" | |||||
Not sure which size to order? See our Arrow Spine Selection Chart.
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Services Available
Standard Fletch: Our experienced fletchers will 3-fletch your Easton XX75 Legacy Carbon Shafting with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. In addition to standard fletch we install a white nock (Z Nock for 1916 shafts, and Bohning Classic Nocks for larger sizes.) Allow 4-7 additional business days for your order to be processed.
Cut Shafts to Length: Have your shafts cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27½".
Install Inserts: Choose this option to have our experts install your Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
Get the Newsletter
