Now till October 15, 2023, Easton Archery is offering a $30 rebate on select dozens of Full Metal Jacket Arrows ($10 on 6-packs). These are for fletched arrows only. Arrow shafts must be purchased with a standard fletch service to be eligible. See Easton Archery's web site for details.
For a limited time Easton is offering their popular 5MM Full Metal Jacket arrow shafts in a retro woodland camo hard-anodize finish.
You'll get that same penetration and durability Full Metal Jackets are famous for, but with the nostalgic look of the classic Easton XX75 Camo Hunter.
Full Metal Jackets feature 7075 aerospace aluminum wrapped around high-strength carbon. This, plus the Micro X diameter (.204" ID), gives you increased kinetic energy, greater precision, and improved penetration. The aluminum also has less friction than carbon, making it easier to remove your Full Metal Jacket arrows from targets. The lower friction also means more pass-throughs on your game, which gives you bigger, better blood trails.
Available in 500 spine in dozens.
- Features
- 5MM (X) micro diameter thick-wall
- Carbon fiber core with 7075 aluminum metal jacket
- Durability, superior kinetic energy, and increased penetration
- Retro Woodland Camo hard-anodize finish
- Factory straight, weight and spine matched ±0.002
- Outside Diameter of 9/32"
- Inside Diameter of .204"
- Spine 500
- Nocks and HIT inserts included
| Easton Full Metal Jacket™ Camo Hunter |
| Spine | Point | GPI | Length | Insert | Nock | Point
Collar |
Nock
Collar |
| 500 | 9/32" | 9.1 | 31" | 16 gr | X | E | -- |
| Straightness ±.002" Weight ±2 grains Length ±½" |
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the valley of the nock to the back of the point. Minimum length is 27½".
Install Point Inserts: Choose thhoose this option to have our experts install your HIT point inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Builder
See Printable Shaft Selection Chart PDF
Get the Newsletter
