


Some of the toughest carbon shafts around. Carbon Express uses their patented BuffTuff® finish (known as "World's toughest and quietest") to really take some abuse when shooting on the range or bow hunting in the back country.
Features a wood grain look that any traditional archer would love. Comes with LaunchPad™ Precision arrow nocks (color varies spine to spine) installed and aluminum inserts included. Heritage™ carbon shafts are imported and fletched in the USA by 3Rivers expert fletchers.
Launchpad™ Precision Nocks offer controlled arrow release, better shaft alignment, and consistent accuracy shot after shot. Colors: 75 spine - Yellow; 90 spine - Lime; 150, 250, and 350 spines - Pearl.
Fletched with three 5" shield Left wing TrueFlight turkey feathers for the perfect balance of speed and stability. The cock feather is traditional barred and the hen feathers are the same color per pack, but can vary between Red, White, Yellow, or Fl-Lime. You may request a hen color, and based on availability, we will do our best to match it.
Sold by the dozen, full length (see chart).
Not sure which size to order? See our Heritage™ Bare Shafting Test Kit.
Please Note:
Heritage 75 and 90 spine shafts are a smaller I.D. (.234) and can accept Easton HP 50/75 grain break off brass inserts. Weight tubes are not offered for either the 75 or the 90 Heritage shafts/arrows.
We also offer 50 and 100 grain brass inserts (.2445 model), and 5/16" weight tubes will fit the 150, 250, and 350 Carbon Express Heritage shafts.
Carbon Express Heritage® Carbon Arrow SpecificsModel (Spine) | ID | Point | GPI | Length | Insert | Nock | Point Collar | Nock Collar |
75 (.670") | .234 | 9/32" | 8.69 | 30 ¼" | 11gr | Launchpad™ | -- | -- |
90 (.588") | .234 | 9/32" | 9.71 | 30 ¼" | 11gr | Launchpad™ | B | B |
150 (.495") | .2445 | 5/16" | 10.11 | 32 ¾" | 11gr | Launchpad™ | D | D |
250 (.391") | .2445 | 5/16" | 10.92 | 32 ¾" | 11gr | Launchpad™ | N | N |
350 (.324") | .2445 | 5/16" | 11.45 | 32 ¾" | 11gr | Launchpad™ | -- | -- |
Straightness ±.005" Weight ±2gr |
PLEASE NOTE: Any service requested may delay shipment. Items with services applied are non-refundable.
Services AvailableCut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".
Install Inserts: Choose this option to have our experts install your Aluminum Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
Not sure which size to order? See Printable Shaft Selection Chart PDF