Axis Traditional ShaftsItem Number: 6747-03
$65.99 $65.99



These quality, attractive carbon shafts are inspired by Doug Easton's 1920's handmade wood arrows. Features a PhotoFusion™ wood-grain finish. Heavy weight, micro X diameter for deeper penetration. Adjustable 75-50gr brass HIT inserts allow more tuning and better broadhead alignment. Constructed of N-FUSED® carbon nano-tubes to increase strength and reduce vibration. Bone color nocks. compatible with Deep Six™ broadheads, and field points. To use these components you must have Deep Six Inserts.
Axis Traditional Carbon Shafting Specifics
Services Available
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27 ½".
Install Inserts: Choose this option to have our experts install your Carbon Express Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Whiz
See Printable Shaft Selection Chart PDF
Have 3Rivers Cut my Arrows to Length
Have 3Rivers Mount my Inserts
See Traditional Only Weight Tubes
See Inserts & Adapters
See Arrow Services
Axis Traditional Carbon Shafting Specifics
Spine | Point | GPI | Length | Insert | Nock | Point Collar | Nock Collar |
600 | 9/32" | 7.9 | 30 ½" | 75-50gr | X | E | E |
500 | 9/32" | 8.9 | 31" | 75-50gr | X | F | F |
400 | 9/32" | 9.8 | 31 ½" | 75-50gr | X | F | F | 340 | 9/32" | 10.3 | 32" | 75-50gr | X | G | G |
Straightness ±.003" Weight ±2gr |
Services Available
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27 ½".
Install Inserts: Choose this option to have our experts install your Carbon Express Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Whiz
See Printable Shaft Selection Chart PDF
Have 3Rivers Cut my Arrows to Length
Have 3Rivers Mount my Inserts
See Traditional Only Weight Tubes
See Inserts & Adapters
See Arrow Services