Easton Axis® Traditional™ Carbon Arrows

For a limited time only, we are including an Easton Antler E Flex Fit baseball cap. Valued at $29.99, and yours FREE. Supplies and time limited.

These quality, attractive carbon arrows are inspired by Doug Easton's 1920's handmade wood arrows. 9/32" micro-diameter for better penetration and low wind drift in flight. Nanotube N-Fused® carbon for strength and reduced vibration with rich detailed PhotoFusion™ wood grain finish. Easton X nocks (color varies per dozen) installed and Aluminum HIT 16gr inserts, insert tool, and epoxy included. Fletched on a clear cap wrap for easy re-fletching.

Compatible with Deep Six™ broadheads, and field points. To use these components you must have Deep Six RPS Inserts.

Comes with Aluminum HIT Inserts (not installed.) If you prefer HIT Break Off Brass Inserts 50-75 gr, you can order them separately.

Available in 600, 500, 400, and 340. Sold by the dozen.

Axis Traditional Carbon Arrow Specifics

Spine	Point	GPI	Length	Insert	Nock	Carbon Collar	Nock Collar
600	9/32"	7.9	30 ½"	16 gr	X	E	--
500	9/32"	8.9	31"	16 gr	X	F	--
400	9/32"	9.8	31 ½"	16 gr	X	F	--
340	9/32"	10.3	32"	16 gr	X	G	--

Straightness      ±.003"        Weight    ±2 grains          Length  ±½"

Services Available
Cut Shafts to Length:  Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".

Install Inserts:  Choose this option to have our experts install your Aluminum 16gr HIT Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.

See Printable Shaft Selection Chart PDF