Traditional Only® Carbon Arrows are the traditional archers perfect carbon arrows. Perfect for bowhunters, with proper weight for pass-thorough penetration and excellent arrow flight. Discover the strength and versatility of carbon arrows with pre-fletched Traditional Only® carbon arrows. Fletched with three 5" shield LW TrueFlight turkey feathers and installed with H Nocks or Super Nocks.
The Traditional Only® offers no-glare PhotoFusion wood grain finish that gives quiet draws every time. Expect the best high-strength ICS® C2™ carbon. Straightness ± .003" with weight tolerance of ± 2.0 grains, and OD (outside diameter) of the popular 5/16". Excellent energy retention, and perfect combination of speed, durability, and price.
Sold by the dozen and 6 pack, full length. Click here
to cut to length. Inserts included, but not installed. Click here
to get inserts installed. Made in the USA
by Easton. Sizes of 600, 500, 400, 340, 300 Sold by dozen or 6-pack PhotoFusion wood grain finish High-strength ICS® C2™ carbon Straightness ± .003" and weight tolerance of ± 2.0 grains H Nock or Super Nock installed Nocks are white - color subject to change without notice Outside Diameter of 5/16" Made in the USA by Easton
Traditional Only Carbon Shafting Specifics
|Spine ||Point ||GPI ||Length ||Insert ||Nock ||Point |
|600 ||5/16" ||7.0 ||30 ¾" ||11gr ||H Nock ||A ||A |
|500 ||5/16" ||8.0 ||31 ½" ||14gr ||Super Nock ||B ||B |
|400 ||5/16" ||9.1 ||32" ||14gr ||Super Nock ||C ||C ||340 ||5/16" ||10.0 ||32 ½" ||14gr ||Super Nock ||D ||D ||300 ||5/16" ||10.1 ||33" ||14gr ||Super Nock ||D ||D |
| Straightness ±.003" Weight ±2gr|
Standard Fletch: Our experienced fletchers will 3-fletch your Carbon Express Piledriver™ Hunter Carbon Shafts with 5" shield left wing TrueFlight feathers. The cock feather will be traditional barred and the 2 hen feathers will be your choice of white, yellow, red, or fluorescent lime (same color for all arrows). Hen feather color can be requested and will be fletched on a CLEAR cap wrap. No substitutions. Allow 4-7 additional business days for your order to be processed.
Cut Shafts to Length: Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27 ½".
Install Inserts: Choose this option to have our experts install your Carbon Express Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.
If you prefer to customize your shaft with additional options, please use our Arrow Whiz
See Printable Shaft Selection Chart PDF