Visitor Monitoring
blank
blank


Arrow Tips by Gold Tip




Arrow Assembly Broadhead Tuning Paper Tuning Bare Shaft Tuning


Arrow Assembly

Gold Tip arrows are not only the best performing arrows on the market; they are also the most user-friendly. With proper care and by adhering to the assembly instructions below you will find Gold Tip shafts quick and easy to assemble in any configuration you desire.

Arrow Cutting

Use only a high speed, abrasive wheel cutoff saw that is designed specifically for cutting arrow shafts. Use of any other method could result in damage to the shaft. It is recommended that your arrow shaft be cut at least one inch in front of the arrow rest at full draw. Arrows that are cut too short can be drawn past the arrow rest which could result in the arrow falling from the string, jamming, or otherwise causing damage to the arrow or the bow, and could even lead to personal injury. Never shoot an arrow that is less than one inch past the arrow rest at full draw.

Tip from the Pros: Try cutting arrow shafts on both ends to improve straightness. Straightness flaws in carbon arrows are typically found on the ends. Cutting both ends will often lead to better straightness and thus, better accuracy.

Installing Inserts

- Read Warning and First Aid instructions on Tip Grip bottle before use.
- Wear safety glasses.
- Do not handle inserts by gluing surfaces as doing so may lead to improper adhesion. Disposable gloves are recommended.
- Use only TIP GRIP adhesive to install inserts. Do not use hot melt glue on carbon arrows.

Step 1: Clean inside of shaft to a depth of 1 inch with clean water on a cotton swab to remove debris. Allow to dry.
Step 2: Apply TIP GRIP adhesive to insert using three generous lines evenly spread and length wise along the flats of the insert.
Step 3: Install insert into shaft and rotate slowly one full turn while doing so.
Step 4: With a clean cloth immediately wipe off any excess glue from the shaft and insert.
Step 5: Allow 24 hours for adhesive to cure before shooting. Shooting before adhesive has fully

Installing Nocks

Gold Tip GT Series and Accu-lite Nocks are designed to fit snuggly without the use of adhesive. Simply press the nock into the shaft and rotate to achieve correct vane orientation.

Gold Tip Pin Nocks and HD Pin Nocks are designed to fit snuggly over a pin nock bushing without the use of adhesive. After following the instructions for installing a Gold Tip pin nock bushing (see below), simply press the nock onto the pin and rotate to achieve correct vane orientation.

Gold Tip Pin Nock Bushings are used in conjunction with a pin nock or HD pin nock. The bushings can be glued in using Tip Grip adhesive or pressed in using plastic or Teflon tape.

Tip from the Pros: Instead of using glue, press your pin nock bushing into the shaft through a piece of plastic grocery bag, or wrap the bushing with Teflon tape prior to pressing it in the shaft. This will allow the bushing to fit tightly without rotating and at the same time, it will allow you to replace the bushing in the event it becomes damaged. If the pin is damaged after being glued in it is very difficult and sometimes not even possible to remove the damaged pin without damaging the shaft. (see photos below)

Nock Install
Glue Nock
Glue Point
blank
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams Click to verify BBB accreditation and to see a BBB report Trust Us Facebook page for 3Rivers Archery YouTube videos for 3Rivers Archery Google+ page for 3Rivers Archery
 
blank
 
 Customer Service    About Us    Product Details    Extra Features    Top Categories
 866-732-8783
 Info@3RiversArchery.com

 My Account 
 Check Order Status 
 Shipping Information 
 Return Policy 
 Privacy Statement 
blank
 3Rivers Archery
 PO Box 517
 607 HL Thompson Jr Dr
 Ashley, IN 46705

 Request a Catalog 
 Learn More About Us 
blank
 Top Searches 
 Gift Certificates 
 Dealer Information 
blank
 Email Sign Up 
 Trophy Room 
 3D Shoots 
 Arrow Whiz 
 Military Discount 
Read Our Blog
blank
 Kid bow sets 
 Recurve bows 
 Longbow bows 
 Carbon arrows 
 Wood arrows 
 Broadheads 
 Youth Archery 
blank
©2014 Three Rivers Archery Supply, Inc. All Rights Reserved.
No part of this web site may be copied or reproduced without the express written permission of Three Rivers Archery Supply, Inc.
3RiversArchery.com
Ask The Experts info@3riversarchery.com Ask the Experts at 3Rivers Archery
Search
Blank space
Order Status Gift Cards Free Catalog Customer Service Sale Items 3Rivers Archery Customer Service and Sale Items
Sign In 3Rivers Archery Welcome and Sign In
($0.00 / 0 items) View Cart at 3Rivers Archery
Background Blank
100% Satisfaction Guarantee 3Rivers Archery 100% Satisfaction Guaranteed
Leading the industry. EXPERIENCE (over 250 years.) KNOWLEDGE (experts at being THE EXPERTS.) AMERICAN PRODUCT SELECTION (over 90% of products Made in the USA.)