Fast Flight Plus™ Flemish Twist Bow String Item Number: 4443X
Made in the US
Fast Flight Plus™ Flemish Twist Bow String

Fast Flight Plus™ Flemish Twist Bow String

Item Number: 4443X
$17.99 $18.99
Made in the US

In Stock

Submit your email to be notified when back in-stock

Fast Flight Plus™ is for bows that can accept low-stretch, high performance string material (normally have reinforced bow tips). Fast Flight Plus™ gives extra speed with the advantages of a Flemish twist of being quieter, easier adjusting as the string stretches, and is easier to attach string silencers, such as fur silencers.

Each of these Fast Flight Plus™ Flemish twist bow strings is made with 18 strands in 3-bundle style for extra thickness to fit arrow nocks. They are center served with black nylon. Strand colors are black and bronze.

Note: Order by string length not bow length, 1" increments. Longbow sizes: 50", or 54"-68". Recurve sizes: 44", 48", or 51"-63".

Measure the bow string you have and round up to the nearest full inch. These strings will stretch a bit as they are broken in. If you don't know the length of your bow string a good rule of thumb is that longbow will take a string 3" shorter than they are marked and a recurve takes a 4" shorter bow string. So, if your bow is a recurve and is marked AMO 60", a 56" bow string should fit.

NOTE: High Performance string material is not recommended for all bows. Please check with your bow's manufacturer to see if your bow is rated "Fast Flight compatible." For older bows or ones you cannot confirm are compatible, we recommend B-50 string material.

Flemish strings are made of several strands of string material twisted upon themselves. It is possible for the area by the string loops to appear to be fraying. This is common and is not damaging to the string. To remove the fraying rub your hand on the strands to lay them down. The wax in the string will hold the strands down, but may appear after some use. You can trim the fraying strands, but this is not recommended. If the wax is not holding the stands down, you can apply some String Makers Wax to the area.