Axis® Traditional™ Carbon Arrows Item Number: 67471X

Axis® Traditional™ Carbon Arrows

Axis® Traditional™ Carbon Arrows

Item Number: 67471X
$164.99 $164.99

In Stock

These quality, attractive carbon arrows are inspired by Doug Easton's 1920's handmade wood arrows. 9/32" micro-diameter for better penetration and low wind drift in flight. Nanotube N-Fused® carbon for strength and reduced vibration with rich detailed PhotoFusion™ wood grain finish. Easton X nocks (color varies per dozen) installed and Aluminum HIT 16gr inserts, insert tool, and epoxy included. Fletched on a clear cap wrap for easy re-fletching.

Compatible with Deep Six™ broadheads, and field points. To use these components you must have Deep Six RPS Inserts.

Comes with Aluminum HIT Inserts (not installed.) If you prefer HIT Break Off Brass Inserts 50-75gr, you can order them separately.

Available in 600, 500, 400, and 340. Sold by the dozen.

Axis Traditional Carbon Arrow Specifics
Spine Point GPI Length Insert Nock Carbon

600 9/32" 7.9 30 ½" 16 gr X E --
500 9/32" 8.9 31" 16 gr X F --
400 9/32" 9.8 31 ½" 16 gr X F --
340 9/32" 10.3 32" 16 gr X G --
Straightness      ±.003"        Weight    ±2 grains

Services Available
Cut Shafts to Length:  Have your carbon arrows cut to length. The length is measured from the throat of the nock to the back of the point. Minimum length is 27½".

Install Inserts:  Choose this option to have our experts install your Aluminum 16gr HIT Point Inserts in your shafts. Please Note: If you select this service without selecting the "Cut to Length" service, your shafts will be cut to the stock length (as specified in the chart above). Please Note: We use epoxy style adhesives on all inserts and most points. Once they are installed, they are permanent.

See Printable Shaft Selection Chart PDF