Noggle Stones™ Wood Arrows
Item Number: 9900X
Price: $44.99 - $56.99
($44.99 plus any option surcharges.)
Noggle Stone Arrows:
--Select--
Noggle Arrows 6-pack, 30-35
Noggle Arrows 6-pack, 35-40
Noggle Arrows 6-pack, 40-45
Noggle Arrows 6-pack, 45-50
Noggle Arrows 6-pack, 50-55
Noggle Arrows 6-pack, 55-60 [not in stock]
Noggle Arrows 6-pack, 60-65 [not in stock]
Service - Cut & Taper Shafting:
--Select--
No Shaft Cut Service Requested
Cut Shafts - 26" (dozen) (+$6.00)
Cut Shafts - 26.25" (dozen) (+$6.00)
Cut Shafts - 26.50" (dozen) (+$6.00)
Cut Shafts - 26.75" (dozen) (+$6.00)
Cut Shafts - 27" (dozen) (+$6.00)
Cut Shafts - 27.25" (dozen) (+$6.00)
Cut Shafts - 27.50" (dozen) (+$6.00)
Cut Shafts - 27.75" (dozen) (+$6.00)
Cut Shafts - 28" (dozen) (+$6.00)
Cut Shafts - 28.25" (dozen) (+$6.00)
Cut Shafts - 28.50" (dozen) (+$6.00)
Cut Shafts - 28.75" (dozen) (+$6.00)
Cut Shafts - 29" (dozen) (+$6.00)
Cut Shafts - 29.25" (dozen) (+$6.00)
Cut Shafts - 29.50" (dozen) (+$6.00)
Cut Shafts - 29.75" (dozen) (+$6.00)
Cut Shafts - 30" (dozen) (+$6.00)
Cut Shafts - 30.25" (dozen) (+$6.00)
Cut Shafts - 30.50" (dozen) (+$6.00)
Cut Shafts - 30.75" (dozen) (+$6.00)
Cut Shafts - 31" (dozen) (+$6.00)
Cut Shafts - 31.25" (dozen) (+$6.00)
Cut Shafts - 26" (6 pack) (+$3.00)
Cut Shafts - 26.25" (6 pack) (+$3.00)
Cut Shafts - 26.50" (6 pack) [not in stock] (+$3.00)
Cut Shafts - 26.75" (6 pack) [not in stock] (+$3.00)
Cut Shafts - 27" (6 pack) (+$3.00)
Cut Shafts - 27.25" (6 pack) (+$3.00)
Cut Shafts - 27.50" (6 pack) (+$3.00)
Cut Shafts - 27.75" (6 pack) (+$3.00)
Cut Shafts - 28" (6 pack) (+$3.00)
Cut Shafts - 28.25" (6 pack) (+$3.00)
Cut Shafts - 28.50" (6 pack) (+$3.00)
Cut Shafts - 28.75" (6 pack) (+$3.00)
Cut Shafts - 29" (6 pack) (+$3.00)
Cut Shafts - 29.25" (6 pack) (+$3.00)
Cut Shafts - 29.50" (6 pack) (+$3.00)
Cut Shafts - 29.75" (6 pack) (+$3.00)
Cut Shafts - 30" (6 pack) (+$3.00)
Cut Shafts - 30.25" (6 pack) (+$3.00)
Cut Shafts - 30.50" (6 pack) (+$3.00)
Cut Shafts - 30.75" (6 pack) (+$3.00)
Cut Shafts - 31" (6 pack) (+$3.00)
Cut Shafts - 31.25" (6 pack) (+$3.00)
Service - Install Field Points:
--Select--
No Field Point Service Requested
Mount Field Points, 12 (+$6.00)
Mount Field Points, 6 (+$4.00)
Full Product Info
Product Ratings & Reviews
Ask A Question
Q:
Would these be recommended for hunting? I've been shooting these for practice for the past year, but they seem a tad slow to me, not sure why. Could it be a result from the excess rotation? My other option would be the 3 rivers hunting arrows. Which would be better?
Asked on 5/18/2013 by jake from Granby, co
Know the answer? Answer this question
1 answer
A:
The Noggle stones arrows are just like the hunter arrows and the only difference is there's no cresting on the Noggle stones and the fletching is a lot bigger with a different cut. The Noggle stones will work just fine for hunting.
Answered on 5/20/2013 by Clint from 3Rivers Archery
Q:
Are these sold as a 6pack only or by the dozen? When I click the down arrow for Service Cutting and Shafting, there are 6pack and dozen options, but for the first down arrow, there is only a 6pack option and I am a bit confused.
Asked on 3/14/2013 by Rianne
Know the answer? Answer this question
1 answer
A:
These are only sold by the 6 pack. All of the arrows have the same drop down box for the service options so in this case since they are only sold by the 6 pack you would just have to select the 6 pack option.
Answered on 3/15/2013 by Josh from 3Rivers Archery
Q:
can I attach arrow heads that were separately bought
Asked on 12/16/2012 by Jraymond from lawrence, MA
Know the answer? Answer this question
4 answers
A:
Yes,after you taper the shafts you can glue on any point you would like.
Answered on 12/18/2012 by Dave from 3Rivers Archery
A:
You can attach points which are glue-on, since these are wooden shafts. This set
of arrows does not actually come with any tips or points on them, so it is your
choice what you want on them. Also, when I ordered my set, I ordered a set of
points from 3 Rivers Archery as well as the service for them to cut the shafts
and attach the points for me and they turned out great.
Answered on 12/17/2012 by Anonymous
A:
Yes. The arrows come without anything on the point, ready for tapering.
Answered on 12/16/2012 by Anonymous
A:
Yes, just make sure you taper the arrows accordingly.
Answered on 12/16/2012 by Anonymous
Q:
In the install points bar, there is nothing about installing glue on broadheads. Does this mean you are unable to do with these arrows?
Asked on 11/20/2012 by AnAvidArcher from Augusta GA
Know the answer? Answer this question
1 answer
A:
We can mount any 11/32 points you would like
Answered on 11/21/2012 by Dave from 3Rivers Archery
Q:
In the product description, the shaft specs are listed as follows:
The diameters normally follow the following parameters
5/16": 30-35 and 35-40
11/32": 40-45, 45-50, and 50-55
But in one of the other answers, someone responded:
"...all the Noggle arrows are 11/32..."
So I just wanted to check before I order these which is accurate?
Asked on 10/25/2012 by sg from Pittsburgh, PA
Know the answer? Answer this question
2 answers
A:
All of these arrows are 11/32.
Answered on 10/26/2012 by Justin from 3Rivers Archery
A:
If they have it in the lower spine it should also be available in 5/16. The reason of that is ( I think so double check) a 11/32 would add more weight to the arrow which is fine because a 40-55 # bow can handle it but if it was a 30# bow using a 30 spined 11/32 it might be to much weight and the path of the arrow will be funky. As well as if you want a 55 spined 5/16. The arrow wont be able to take that kind of force. Anyway it's good to experiment. I hav them at 55 11/32 and they seem grate. I just want more arrows lol I always go for the phantom 7th arrow lol
Sent from my iPhone
Answered on 10/25/2012 by Anonymous
Q:
Which one of your tips would you reccomend for this arrow?
Asked on 4/21/2012 by Anonymous
Know the answer? Answer this question
1 answer
A:
The tip you will need is the 11\32 glue on field points.
Answered on 4/23/2012 by Clint from 3Rivers Archery
Q:
Would these arrows work on a bow that has a 20Lb. draw back that's 24 inches?
Asked on 4/21/2012 by Anonymous
Know the answer? Answer this question
1 answer
A:
You will want to leave them full length with probable 125 grain point. The spine you will need is the 30\35.
Answered on 4/23/2012 by Clint from 3Rivers Archery
Q:
Sometimes when I shoot these the fletching will slice my knuckle after release. Is there a way to prevent this? (nocking the arrow higher or lower) Or maybe to round off the end of the fletching. It hurts, too. Enough to draw blood.
Asked on 1/11/2012 by Clayton
Know the answer? Answer this question
2 answers
A:
I would push the ends of the fletching down using something round (even a pen) and then put a drop of glue to break the edge and secure the fletching in place. You can also use silk thread or sinew to wrap the edges of the fletching so they appear to be "tied" in place. Gives a great look to the arrow.
Answered on 1/16/2012 by Johnathan Karch from 3Rivers Archery
A:
I'm assuming you're shooting off hand. Get a glove, either from 3rivers or even an old leather glove will do (try to avoid large stitches where the arrow will lay on your hand). Moving the arrow up or down will simply cause inaccuracy.
Answered on 3/15/2012 by Fuma from Granby, CO
Q:
Do you recommend these arrows for an adult beginner? I'm planning on buying a 45# Samick Sage recurve and would use them primarily for target practice. Thanks!
Asked on 8/22/2011 by Anonymous
Know the answer? Answer this question
1 answer
A:
These would work great out of your Sage for target practice. If you don't know what spine you will need, I would suggest calling one of the 3Rivers tech's at 260-587-9501 for some help.
Answered on 8/25/2011 by Shawn from 3Rivers Archery
Q:
can you put Ace Classic Points 125gr 11/32" tips on these arrows and how long would the arrows need to be for a 45# 28in bow?
Asked on 8/20/2011 by kc
Know the answer? Answer this question
1 answer
A:
Yes you can all the Noggle arrows are 11/32 the length depends on your draw usually your height divided by 2.5 will tell you your draw and an inch for clearance
Answered on 8/23/2011 by Dave from 3Rivers Archery
