Tred Barta Wilderness Arrows
Item Number: 8300X
Price: $91.99 - $112.99
($91.99 plus any option surcharges.)
Tred Barta Wilderness Arrows:
--Select--
Tred Barta Arrows, DZ - 40-45 Spine
Tred Barta Arrows, DZ - 45-50 Spine
Tred Barta Arrows, DZ - 50-55 Spine
Tred Barta Arrows, DZ - 55-60 Spine
Tred Barta Arrows, DZ - 60-65 Spine
Tred Barta Arrows, DZ - 65-70 Spine
Tred Barta Arrows, DZ - 70-75 Spine
Tred Barta Arrows, DZ - 75-80 Spine
Tred Barta Arrows, DZ - 80-85 Spine
Service - Cut & Taper Shafting:
--Select--
No Shaft Cut Service Requested
Cut Shafts - 26" (dozen) (+$6.00)
Cut Shafts - 26.25" (dozen) (+$6.00)
Cut Shafts - 26.50" (dozen) (+$6.00)
Cut Shafts - 26.75" (dozen) (+$6.00)
Cut Shafts - 27" (dozen) (+$6.00)
Cut Shafts - 27.25" (dozen) (+$6.00)
Cut Shafts - 27.50" (dozen) (+$6.00)
Cut Shafts - 27.75" (dozen) (+$6.00)
Cut Shafts - 28" (dozen) (+$6.00)
Cut Shafts - 28.25" (dozen) (+$6.00)
Cut Shafts - 28.50" (dozen) (+$6.00)
Cut Shafts - 28.75" (dozen) (+$6.00)
Cut Shafts - 29" (dozen) (+$6.00)
Cut Shafts - 29.25" (dozen) (+$6.00)
Cut Shafts - 29.50" (dozen) (+$6.00)
Cut Shafts - 29.75" (dozen) (+$6.00)
Cut Shafts - 30" (dozen) (+$6.00)
Cut Shafts - 30.25" (dozen) (+$6.00)
Cut Shafts - 30.50" (dozen) (+$6.00)
Cut Shafts - 30.75" (dozen) (+$6.00)
Cut Shafts - 31" (dozen) (+$6.00)
Cut Shafts - 31.25" (dozen) (+$6.00)
Cut Shafts - 26" (6 pack) (+$3.00)
Cut Shafts - 26.25" (6 pack) (+$3.00)
Cut Shafts - 26.50" (6 pack) [not in stock] (+$3.00)
Cut Shafts - 26.75" (6 pack) [not in stock] (+$3.00)
Cut Shafts - 27" (6 pack) (+$3.00)
Cut Shafts - 27.25" (6 pack) (+$3.00)
Cut Shafts - 27.50" (6 pack) (+$3.00)
Cut Shafts - 27.75" (6 pack) (+$3.00)
Cut Shafts - 28" (6 pack) (+$3.00)
Cut Shafts - 28.25" (6 pack) (+$3.00)
Cut Shafts - 28.50" (6 pack) (+$3.00)
Cut Shafts - 28.75" (6 pack) (+$3.00)
Cut Shafts - 29" (6 pack) (+$3.00)
Cut Shafts - 29.25" (6 pack) (+$3.00)
Cut Shafts - 29.50" (6 pack) (+$3.00)
Cut Shafts - 29.75" (6 pack) (+$3.00)
Cut Shafts - 30" (6 pack) (+$3.00)
Cut Shafts - 30.25" (6 pack) (+$3.00)
Cut Shafts - 30.50" (6 pack) (+$3.00)
Cut Shafts - 30.75" (6 pack) (+$3.00)
Cut Shafts - 31" (6 pack) (+$3.00)
Cut Shafts - 31.25" (6 pack) (+$3.00)
Mount Broadheads:
--Select--
No Broadhead Service Requested
Mount B-Heads 12 (+$9.00)
Mount B-Heads 6 (+$5.00)
Service - Install Field Points:
--Select--
No Field Point Service Requested
Mount Field Points, 12 (+$6.00)
Mount Field Points, 6 (+$4.00)
Full Product Info
Product Ratings & Reviews
Ask A Question
Q:
With The Broadhead mount service can I get any broadhead avaliable from 3rivers mounted?
Asked on 12/8/2012 by jb from North Carolina
Know the answer? Answer this question
1 answer
A:
Yes, we can mount any of the glue on broadheads that we carry. Just choose your broadhead and add it to your cart with the MTB.
Answered on 12/11/2012 by Justin from 3Rivers Archery
Q:
Hi, interested in getting a dozen of these set up to bust bunnies w/my recurve. Proper arrow selection/tip matching is still a bit of a mystery to me im still pretty new to archery.
Heres what I know: I have a 35lb pse blackhawk and on a cheap walmart arrow I measure 29.5" from string to edge of bow fully drawn w/o the 1"-2" extra arrow lentgh added on. I want to shoot bunny busters or something similar. What size arrow (spine and length) should I select? What size buster? will I need to taper the shaft to accept it? Can u do all the work for me haha?
Asked on 1/15/2012 by Chris from Durango, Co
Know the answer? Answer this question
1 answer
A:
You will want most likely 50-55# arrows cut to 31". That will need the 11/32" Bunny Busters. The shafts do not need to be tapered to use the Bunny Busters.
http://www.3riversarchery.com/product.asp?i=H511X http://www.3riversarchery.com/product.asp?i=CUT6X You would only need to buy the bunny busters, arrows, and the cut and taper services above and we would do all the hard work. Still would have to mount the points, but that is as easy as pushing them on the end of the arrows.
Answered on 1/16/2012 by Johnathan Karch from 3Rivers Archery
Q:
Hi my question is can these specific arrows be used in your Heavy Weight Bamboo Backed Warbow and if not what arrows would you recomend for this bow? And for that bow and whatever type of arrows you recomend would you recomend a certain type of broadhead or would simple glue-on 3-blade broadheads work fine?
Asked on 12/29/2011 by Bowmaster619
Know the answer? Answer this question
1 answer
A:
It will all depend on draw weight, arrow length and point weight to figure the correct spine needed for a specific bow and arrow combination. Most 2-3 blade glue on broadheads will work just fine, 2 blade heads will get you good penetration while a 3 blade will get you better blood trails.
Answered on 1/9/2012 by Shawn from 3Rivers Archery
Q:
Is there a reason to not shoot a higher spine than recommended? For example if you are shooting a longbow thats 60# at 28",what would be the recommended spline and why wouldn't you want anything with a heavier one? Or is price the real factor most of the time?
Asked on 12/27/2011 by nick from Cleveland,OH
Know the answer? Answer this question
1 answer
A:
The spine is the defection of the shaft and depending on the draw weight, arrow length and point weight do you figure out what spine weight you would need. For a modern fiberglass backed long bow with a shelf at 60#'s I would go with 65-70 for spine weight and that's cutting the shaft to 29 - 29 1/2 inches and using 100-160 grain points.
Answered on 12/29/2011 by Shawn from 3Rivers Archery
Q:
Do these arrows need glue on broadbeads or do they have inserts for screw in broadbeads??? Thanks
Asked on 12/26/2011 by Sam the Archer from Birch Run, MI
Know the answer? Answer this question
1 answer
Q:
are thes arrows good for 3d shoots
Asked on 12/4/2011 by derector of 3d at cfb halifax from nova scotia canada
Know the answer? Answer this question
1 answer
A:
Yes, they are a great shaft that will work well for 3D, hunting and stump shooting.
Answered on 12/5/2011 by Shawn from 3Rivers Archery
Q:
Do these arrows includes arrowheads? Or are these just the shafts?
Asked on 9/26/2011 by Matt
Know the answer? Answer this question
3 answers
A:
No they do not come with any point's just the shaft. You will have to perches the points separately.
Answered on 10/4/2011 by Clint from 3Rivers Archery
A:
they do not come with points or broadheads! however i do belive that 3r will cut them to length and mount what ever points you want to purchase on them for you!
Answered on 12/4/2011 by the woodman from cochran Va.
A:
Just the shafts with fletching. The arrows come at a length of 32". 3 R can install arrowheads for u just call.
Answered on 11/20/2011 by Captroop from Niceville, Fl
Q:
What is the diameter of these arrows? I need to match tips. Thanks.
Asked on 8/27/2011 by Skeet from Belmont,NC
Know the answer? Answer this question
1 answer
A:
That will depend on the spine that you order. Through 60-65 they will be 11/32. Anything higher will be 23/64.
Answered on 8/29/2011 by Justin from 3Rivers Archery
Q:
What is the approximate shaft grains per inch (GPI) measurement of the 11/32 and the 23/64 shafts? I realize it varies due to the organic nature of wood, however I just need an approximate or average value to determine proper arrow tuning using Stu Miller's Dynamic Spine Calculator. Thanks!
Asked on 8/24/2011 by talleywho from GSMNP - TN Side
Know the answer? Answer this question
1 answer
A:
It really does vary from shaft to shaft. You could have as much as a 100gr spread. I wish I could be of more help.
Answered on 8/26/2011 by Justin from 3Rivers Archery
Q:
Does 30-35 spine exist ?
Asked on 8/24/2011 by Jeff from Le Teich, France
Know the answer? Answer this question
1 answer
