Easton Carbon Injexion™ Carbon Shafts
Item Number: 6704X
Price: $159.99 - $206.99
($159.99 plus any option surcharges.)
Carbon Injexion Shafts:
--Select--
Easton N-Fused Carbon Injexion Shafts - 480 [31.25" length] (dozen)
Easton N-Fused Carbon Injexion Shafts - 400 [31.75" length] (dozen)
Easton N-Fused Carbon Injexion Shafts - 330 [32.25" length] (dozen)
SERVICE: Fletch Shafts:
--Select--
No Fletching Service Requested
Standard Fletch Shafts - Hen=Lime (dozen) (+$35.00)
Standard Fletch Shafts - Hen=White (dozen) (+$35.00)
Standard Fletch Shafts - Hen=Red (dozen) (+$35.00)
Standard Fletch Shafts - Hen=Yellow (dozen) (+$35.00)
SERVICE: Cut Shaft and/or Install inserts:
--Select--
No Shaft Cut Service Requested
Cut Shafts - 27.50" (dozen) (+$6.00)
Cut Shafts - 27.50" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 27.75" (dozen) (+$6.00)
Cut Shafts - 27.75" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 28" (dozen) (+$6.00)
Cut Shafts - 28" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 28.25" (dozen) (+$6.00)
Cut Shafts - 28.25" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 28.50" (dozen) (+$6.00)
Cut Shafts - 28.50" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 28.75" (dozen) (+$6.00)
Cut Shafts - 28.75" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 29" (dozen) (+$6.00)
Cut Shafts - 29" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 29.25" (dozen) (+$6.00)
Cut Shafts - 29.25"& Install Inserts (dozen) (+$12.00)
Cut Shafts - 29.50" (dozen) (+$6.00)
Cut Shafts - 29.50" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 29.75" (dozen) (+$6.00)
Cut Shafts - 29.75" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 30" (dozen) (+$6.00)
Cut Shafts - 30" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 30.25" (dozen) (+$6.00)
Cut Shafts - 30.25" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 30.50" (dozen) (+$6.00)
Cut Shafts - 30.50" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 30.75" (dozen) (+$6.00)
Cut Shafts - 30.75" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 31" (dozen) (+$6.00)
Cut Shafts - 31" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 31.25" (dozen) (+$6.00)
Cut Shafts - 31.25" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 31.50" (dozen) (+$6.00)
Cut Shafts - 31.50" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 31.75" (dozen) (+$6.00)
Cut Shafts - 31.75" & Install Inserts (dozen) (+$12.00)
Cut Shafts - 32" (dozen) (+$6.00)
Cut Shafts - 32" & Install Inserts (dozen) (+$12.00)
Full Product Info
Product Ratings & Reviews
Ask A Question
Q:
1.When bare shaft tune, do I cut from the nock end? Never used g nicks before. Are the g nocks glued in or r they the snap type that can b removed? 2.Do Easton lighted nocks come in g nock size?
Asked on 11/19/2012 by Hdjdei
Know the answer? Answer this question
2 answers
A:
I have a set of Easton ACC 3-60 with uni-bushings for my old PSE Carroll Intruder compound bow,the G-Nocks aren't glued, if you break a nock , you can easily replace it !
Answered on
2/1/2013 by
J-C from
3-Rivières,Quebec,Canada
A:
With these arrows it would be easier to trim from the nock end. The G nocks are friction fit, they are not glued in.
No, there are not lighted nocks in the G size.
Answered on 11/19/2012 by Justin from 3Rivers Archery
Q:
Do u plan offer test kit for these? Thx
Asked on 11/19/2012 by Nancy from Barstow ca
Know the answer? Answer this question
1 answer
A:
No, we are not planning to offer it as a test kit anytime soon.
Answered on 11/19/2012 by Justin from 3Rivers Archery
Q:
Being of such small diameter, is it hard to fletch with a helical feather, say using a bitzeburger?
Asked on 7/22/2012 by Mike from South Dakota
Know the answer? Answer this question
1 answer
A:
It can be a little more difficult, but it is not impossible. You will just need to make sure that you double check all of the alignments before you start gluing.
Answered on 7/23/2012 by Justin from 3Rivers Archery
Q:
What are the Outer and Inner Diamters of the shafts? Are there any target style bullet points that could fit or would inserts and screw in points be required for target purposes?
Asked on 1/20/2012 by Anonymous
Know the answer? Answer this question
1 answer
Q:
Are the factory crests built into the shaft or are they like a standard wrap?
Asked on 1/6/2012 by franklinmanklin from Bannister, MI
Know the answer? Answer this question
1 answer
A:
They are cap wraps installed at Easton.
Answered on 1/9/2012 by Shawn from 3Rivers Archery
