Gold Tip Traditional Carbon Arrows

Item Number: 67030X

Price: $64.99 - $131.99
($64.99 plus any option surcharges.)

Fletched Gold Tip Traditional Arrows:

SERVICE: Cut Shafts and/or Install Inserts:

QTY

>Add to Cart

Add to Wish List

Full Product Info

Product Ratings & Reviews

Ask A Question


		Do you have questions about this product? Ask a question get answers from real customers and in-house experts with AnswerBox. 12 Questions \| 12 Answers Displaying questions 1-10Previous \| Next » Q: I'm doing my initial setup for my gear. I will be getting the PSE Summit 66". I will only be target shooting. By selecting the cut shafts and install inserts option will they be ready to shoot? Or do I need to do anything more? Will I need to change the nocks to work with the bow? What is the proper method for determining lengh? I have read three different options. Asked on 5/4/2013 by Lori from Phoenix, AZ Know the answer? Answer this question 1 answer A: Yes, they will be ready to shoot. You will just need to screw in the points. You should not need to change your nocks to accommodate the bow. The length of the arrow needs to be at least an inch longer than your draw length. Other than that the arrow can be as long as you like. Answered on 5/6/2013 by Justin from 3Rivers Archery Q: Hi! When I order these arrows, can I make a request to have 50 gr. brass inserts installed instead of the standard 11.4 gr aluminum inserts? The specific product I have in mind for inserts is: Item #0261 - Brass Inserts 5/16" .246 Easton/Beman/GT - 50 grain (dz) . Also, if I have those brass inserts installed, can I further customize the weight of the inserts by adding the Gold Tip Screw in Weights? (10 and 20 grains - Item #6693-02). Do I just need the extra GT Adjustment Weight wrench to make that work or is there anything else I need? Thanks! Asked on 4/22/2013 by Jerry from El Paso, IL Know the answer? Answer this question 1 answer A: Yes we can put the brass inserts in for you. You will need a master adapter to put in the back of the insert and you will need the long wrench to the different weight's on. Answered on 4/23/2013 by Clint from 3Rivers Archery Q: Hi I have a few questions about inserts and adapters for the Gold Tip Trad arrows. Are the standard inserts (11.4 gr.) made of aluminum? Also, can you tell me how long those inserts are? Are these inserts compatible with all 3 of the 'Gold Tip Screw in Weights' (10, 20 and 50 grains)? Are these extra weights made of aluminum or brass...and can you provide approximate lengths of these weights? Thanks! Asked on 4/21/2013 by Jerry from El Paso, IL Know the answer? Answer this question 1 answer A: The length of the adapters are about an 1/8 to 1/4 inch long and they are made to go into the back of the insert. The standard insert is aluminum. They will fit both the brass and the aluminum inserts if you do want to use the screw in weight's you will need to get the adapter also. Answered on 4/22/2013 by Clint from 3Rivers Archery Q: When ordering the gold tipped traditional arrows do they come with points or is that something that I need to purchase separately? Asked on 4/14/2013 by Newcomer Know the answer? Answer this question 1 answer A: The Gold Tip arrows do not come with the points. You will need to purchase the 5/16 size to match up with these arrows. Answered on 4/15/2013 by Art from 3Rivers Archery Q: What kind of inserts installed on the arrows? I recently bought a dozen and had them cut/inserts installed. I'm trying to figure out if I need glue-on or screw-on points. I am very much a neophyte to archery and so i did not buy the points with the arrows, which as i understand 3rivers would have installed as part of the cut/insert installation service and must now buy them and install them seperately. Asked on 3/6/2013 by Kajidourden from Panama City, FL Know the answer? Answer this question 1 answer A: These come with just a standard Gold Tip insert. You will be able to use any of the standard screw in field points. Answered on 3/6/2013 by Justin from 3Rivers Archery Q: I am shooting 3555 XT's which are 32" in length not 30" - do you stock these ? Asked on 3/4/2013 by The English Archer Know the answer? Answer this question 1 answer A: No, we do not carry the XT's. Answered on 3/5/2013 by Justin from 3Rivers Archery Q: 1) What is the STRAIGHTNESS TOLERANCE on these? .003 or .006? 2) Do these come with inserts? Asked on 1/15/2013 by Scott from Washington State Know the answer? Answer this question 1 answer A: .003 or .006 you pick the straighter the more they cost. Yes they come with nocks and inserts. Answered on 1/16/2013 by Dave from 3Rivers Archery Q: Hi, I am new to archery and thinking of ordering a Samick Sage Bow. What type of spines would I need for the following setup: -Samick Sage Bow with a)30# b)45# limbs -Flemish Bowstrings Brownell's Fast Flight Plus @ 28 inches length. (I have read that with these "new-tec" stings you should add 5# compared to the included string from Samick?) -Drawlength 29.5 inches. (Do I add 3.75# compared to the 28 inch norm?) Looking at the chart, is it correct to add 2 inches to the length of the arrow, so that the tips are not near my fingers? What I came up with are 500_3555 for the 30# limbs and 400_5575 for the 45# limbs. Am I correct with my assumption? Also im not sure if the weight of the arrow tips makes a difference? If so, what do you recommend? I really like all the information found on this site. What a great service! Thanks Asked on 1/3/2013 by Philipp Know the answer? Answer this question 1 answer A: I would recommend shooting the 35-55 spine shaft with a 125 grain point and I would leave them full length. Answered on 1/3/2013 by Clint from 3Rivers Archery Q: shoot a 44# 60 inch recurve target practice only.which arrow do i need? Asked on 11/25/2012 by dave from dothan,alabama Know the answer? Answer this question 1 answer A: To best determine the correct arrow that you will need, We will need to know your draw length and point weight. If you can give us a call in here at 866-587-9501 we can help you further in your selection. Answered on 11/26/2012 by Art from 3Rivers Archery Q: What diameter screw in field points do the Gold Tip Traditional Carbon 1535 shafts use with stock GT inserts? I think the outside shaft diameter is 19/64 (0.2969) but will 5/16 points be OK with the inserts provided? Asked on 10/24/2012 by Jason from Norcal, CA Know the answer? Answer this question 1 answer A: Yes you want 5/16 points Answered on 10/25/2012 by Dave from 3Rivers Archery Displaying questions 1-10Previous \| Next » Ask a question Do you have a question about this product?

		May We Suggest..


		Traditional Only® Carbon Arrows


		Beman ICS® Bowhunter™ Carbon Arrows


		Carbon Express Heritage® Carbon Arrows


		3Rivers Hunters Arrows


		3Rivers Classic Arrows


		Easton Gamegetter® XX75 Aluminum Arrows


		Gold Tip Twister Flu-Flu Carbon Arrow