Visitor Monitoring
blank
blank
Arrows & Shafting>Fletched Arrows>Carbon Arrows
blank
 
Traditional Only® Carbon Arrows
blank

Traditional Only® Carbon Arrows

blank
Item Number: 6781X
blank
Price:
($72.95 plus any option surcharges)
   This item is Made in the USA    
blank
  
blank
blank
 Fletched Traditional Only Arrows:
 
 SERVICE: Cut Shafts and/or Install Inserts:
 
blank
 Add comments:
 QTY   >Add to Cart    Add to Wish List
blank
blank
Full Product Info blank Product Ratings & Reviews blank Ask A Question
blank
blank blank blank blank blank
blank blank

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

124 Questions | 180 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    I have used traditional only carbon before with my Samick Sage 62" Takedown bow before. I don't remember exactly what length arrow I had though. Any recommendations for figuring this out? I know it has to do with draw length, but I don't remember that either unfortunately. The bow I have is the 50 lb.

    Thank you
    Asked on 8/20/2014 by Duck from Carrboro, NC

    1 answer

    • Staff Reviewer

      A:

      All you have to do is call in and we can tell you which length you had last time. We keep all of your information on file.

      Answered on 8/20/2014 by Dave from 3Rivers Archery
  • Q:

    what is an "insert" on an arrow?
    Asked on 7/10/2014 by none

    1 answer

    • Staff Reviewer

      A:

      An insert is a sleeve that slides inside the arrow shaft and glued into place. It has threads inside it that allow the points to be screwed onto the arrow.

      Answered on 7/14/2014 by Sam from 3Rivers Archery
  • Q:

    I see that these arrows can come in 33" but that the longest cut size is 31.75". Is there a way to have them cut a bit closer to the full length, or if not, have inserts put into the full length arrow?
    Asked on 6/5/2014 by Dustin from United States

    2 answers

    • VERIFIED BUYER

      A:

      This is one that the arrow makers at 3Rivers has to answer. I've never needed arrows that long. Sorry I don't have a good answer for this one.
      Good luck & good shooting,
      Dewey
      Sent from my iPhone 5!

      Answered on 6/8/2014 by D Dykstra from Boise, ID
    • Staff Reviewer

      A:

      Depending upon the spine, the arrows do come in different lengths. If you are ordering on the web, you can enter "CUT6X" in the search box to bring up the option to cut your arrows and the lengths go up to 33"

      Answered on 6/5/2014 by Sam from 3Rivers Archery
  • Q:

    Could I have a set made w/ 2 dark brown 1 white feathers and no wrap
    Asked on 6/1/2014 by Ian from United States

    1 answer

    • Staff Reviewer

      A:

      Yes, it would have to be a custom fletch. You can use the "Arrow Whiz" online or call our tech line.

      Answered on 6/2/2014 by Sam from 3Rivers Archery
  • Q:

    i have a Fred Bear Grizzly 45# recurve bow. I'd like to match carbon arrows to the bow. Is the Fletched Traditional Only 300 a good match for the bow with the 45# draw weight?
    Paul
    Asked on 4/5/2014 by Paul from Memphis

    1 answer

    • Staff Reviewer

      A:

      It depends upon your draw length, point weight, etc.
      I would say the 300 are most likely too stiff of a spine.
      You can look at our arrow charts at this following link:
      http://www.3riversarchery.com/pdf/ArrowCharts.pdf

      Answered on 4/9/2014 by Sam from 3Rivers Archery
  • Q:

    Please confirm price of Traditional Only 30.75" fletched carbon arrows is $72.95 and cut to requested length and install inserts add $6.00.
    I am assuming quantity of 1 means a 6 pack and add #55.04 for a dozen.
    Asked on 3/16/2014 by T R from Longwood, FL

    1 answer

    • Staff Reviewer

      A:

      Yes, that is correct.

      Answered on 3/18/2014 by Sam from 3Rivers Archery
  • Q:

    Does this come with field points on it? If it doesn't can I screw in field points?
    Asked on 3/15/2014 by Justin from Ridgewood, NJ

    1 answer

    • Staff Reviewer

      A:

      No, the field points are not included. The arrows need cut to length and the inserts installed, then the field points can be screwed in.

      Answered on 3/18/2014 by Sam from 3Rivers Archery
  • Q:

    Can someone offer advice on arrow-length I should use for these arrows, to get a good flight with a 30# bow and a 27" draw?

    I've bought uncut Gold Tips before and they felt much too long and heavy, like it was real effort to get them to the target. I've heard people saying that new archers should leave their arrows uncut because their archor-points haven't settled yet etc, but I've been shooting for a couple of months and my draw is fairly consistent. I prefer my shorter 29" aluminum arrows to my uncut carbons, but if I cut these Traditional Only arrows down to the suggested 1" from my riser, won't it dramatically stiffen the dynamic spine?
    Asked on 3/14/2014 by Treya from Fairbanks, Alaska

    2 answers

    • Staff Reviewer

      A:

      Cutting the arrows down a couple inches will not lighten them enough to tell much difference. However it will stiffen the arrow and may cause poor arrow flight with your bow.

      Answered on 3/21/2014 by Dave from 3Rivers Archery
    • VERIFIED BUYER

      A:

      Hi Treya,
      If you look at the top or first page of the arrow selection/spine chart, it suggests that the arrow should be a minimum of one inch longer than your draw length. So, 2" beyond the draw length would be fine.
      But, the issue is what spine are the carbon gold tips? That is going to lay boundary conditions on the point weight and length of your arrows. You can use the spine chart to figure out what is possible for your arrows and your bow. Note that horizontally in the center section of the carbon chart, the same spine will work for 2 - 5 arrow lengths. Hopefully, the actual spine of the shafts you bought gives you the range of actual arrow length you want. The spine matched can be adjusted with the point weight to a certain degree, too.
      While the actual arrow length will change your sight picture, as long as the arrow is matched according to the spine chart to your bow and draw length, it should not clash with the limb of your bow as the fletching end of the arrow goes by it.
      One other thing, you may realize that cutting carbon shafts is a non-trivial task because of the carbon fibers. Normal saws that would be okay for a wood or even possibly aluminum arrows, in general are not suitable for cutting carbon arrows. There may be other options, but I bought a carbon cut off saw from 3Rivers.
      Good luck in your efforts and in your shooting.
      Dewey

      Answered on 3/14/2014 by D Dykstra from Boise, ID
  • Q:

    I'm getting a new longbow (Bear Montana). It's 55#, although my draw length is only 26.8" so a little less than that. Could you help me order the correct Traditional Only Carbon Arrows (length and weight)? I'll be shooting field points at first, but would like to add broadheads later on. Thanks.
    Asked on 2/5/2014 by Kyle

    1 answer

    • Staff Reviewer

      A:

      On my 55 pound Longbow I like to shoot the 400s with a 100 grain brass insert. With your shorter draw lengths you may be better off with a 500. It is so close on the charts that I would recommend getting a test kit

      Answered on 2/6/2014 by Dave from 3Rivers Archery
  • Q:

    when ordering traditional only carbon arrows, i am not sure how to match the length of the cut arrow with insert installed to the length of the fletched arrow. for example, if i want to order the 28.5" length with insert installed, what is the appropriate length of the uncut fletched arrow?
    Asked on 1/26/2014 by JS just learning

    1 answer

    • Staff Reviewer

      A:

      The uncut lengths are in the chart in the description. You would be able to get any spine cut to the 28.5" length you want though.

      Answered on 1/28/2014 by Johnathan Karch from 3Rivers Archery
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

blank blank
blank blank blank blank blank
blank
blank
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams Click to verify BBB accreditation and to see a BBB report Trust Us Facebook page for 3Rivers Archery YouTube videos for 3Rivers Archery Google+ page for 3Rivers Archery
 
blank
 
 Customer Service    About Us    Product Details    Extra Features    Top Categories
 866-732-8783
 Info@3RiversArchery.com

 My Account 
 Check Order Status 
 Shipping Information 
 Return Policy 
 Privacy Statement 
blank
 3Rivers Archery
 PO Box 517
 607 HL Thompson Jr Dr
 Ashley, IN 46705

 Request a Catalog 
 Learn More About Us 
blank
 Top Searches 
 Gift Certificates 
 Dealer Information 
blank
 Email Sign Up 
 Trophy Room 
 3D Shoots 
 Arrow Whiz 
 Military Discount 
blank
 Kid bow sets 
 Recurve bows 
 Longbow bows 
 Carbon arrows 
 Wood arrows 
 Broadheads 
 Youth Archery 
blank
©2014 Three Rivers Archery Supply, Inc. All Rights Reserved.
No part of this web site may be copied or reproduced without the express written permission of Three Rivers Archery Supply, Inc.
3RiversArchery.com
Ask The Experts info@3riversarchery.com Ask the Experts at 3Rivers Archery
Search
Blank space
Order Status Gift Cards Free Catalog Customer Service Sale Items 3Rivers Archery Customer Service and Sale Items
Sign In 3Rivers Archery Welcome and Sign In
($0.00 / 0 items) View Cart at 3Rivers Archery
Background Blank
100% Satisfaction Guarantee 3Rivers Archery 100% Satisfaction Guaranteed
3Rivers Archery leads the Industry with Experience, Knowledge, and American Product Selection