|
|
 |
Trophy Bur Limb Bolts |
|
|
Item Number: 3401X
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: what size should i get for the predator recurve bow. this will make it tool free right no need for hex key then. Asked on 4/23/2013 by daniel from Canada Know the answer? Answer this question 3 answers A: Measure the existing limb bolts but be sure measure the bolt from base to end, not end to end just in case your stock ones are recessed. Answered on 4/23/2013 by Anonymous A: You will want 5/16 X 1 3/4 and yes it will be a hands free job. Answered on 4/23/2013 by Clint from 3Rivers Archery A: Sorry, don't know anything about Predator bows. But if it's 5/16" bolt, it will work w/ 3rivers antler bolts. Wyatt KWIKDRAW....OK? Answered on 4/23/2013 by Anonymous
Q: Can these be dyed darker to look old? Asked on 3/27/2013 by trapper from Tennessee Know the answer? Answer this question 7 answers A: I'd say yes they probably could. They feel pretty porous. I think a good soak in some black coffee might do the trick. Hope that helps. Answered on 3/28/2013 by Anonymous A: Yes they can. I prefer a alcohol based stain. Answered on 3/28/2013 by Lonesome Wind from Fremont NE A: Not sure about being dyed, i'm assuming yes, you can definitely stain them Answered on 3/28/2013 by Anonymous A: I haven't tried it, but I'm sure you could, although I would be careful, could get 'em too dark! Wyatt KWIKDRAW....OK? Answered on 3/28/2013 by Anonymous A: Absolutely...I just used some walnut stain and mine have that classic old look your desiring. Note: take them off the bow to stain them. They dry quickly and the smell dissipates in a day or two. Answered on 3/28/2013 by Anonymous A: I have used wood stain on three different sets with good results. They seem to stain dark in relation to the stain used so error on the side of a color a little lighter than you would want, you can always go darker if need be but going lighter after they are to dark is tough. If you have tapered limb bolts don't forget to get the tapered adapters. 37Ranger Answered on 3/28/2013 by 37Ranger from New Mexico A: I'm sure you could die them I haven't ever tried it before. Answered on 3/28/2013 by Clint from 3Rivers Archery
Q: Are these made with 1/4x20 bolts, and if so how long is the treaded part? Asked on 1/30/2013 by Kwikdraw from Fredericksburg, TX Know the answer? Answer this question 3 answers A: I don't know what size the bolts are... But u believe there is a I dusty standard so the thread should fit any takedown longbow/ recueve. The length of the bolt is given on the site... It lets you choose your desired length..... The length is from the base of the burr to the end of the bolt. Hope this helps! Sent from my iPhone Answered on 1/31/2013 by Anonymous A: The one's that I purchased were 5/16-18 and they come in three or four lengths for what you need. The accessory bolts may be available in 1/4-20 Keep your stick bent! Vince Answered on 1/30/2013 by Lonesome Wind from Fremont NE
Q: Will these work on the PSE Mustang? Brass insert button 3/4" diameter with Countersink bolt on the bow now. Will I need the countersink brass spacers you sell to fill the gap? Asked on 8/14/2012 by Azgnome from Glendale, az Know the answer? Answer this question 2 answers A: Trophy Bur Limb Bolts will work on every bow,.... with brass insert buttons, ......with or without brass spacers, but, honestly I didn't like it, they (Trophy Bur Bolts) have bigger diameter that any spacers you have on the bow and they will look to big and to high on the bow (they look fake anyway). The only good thing is that the bow becomes "no tools TD". Thanks Answered on 8/15/2012 by Anonymous A: I do not have a Mustang here to check it against, but a vast majority of bows will use a 5/16 limb bolt. You will just need to select the correct length of bolt. The adapters will help you to make sure that you get a secure fit. Answered on 8/17/2012 by Justin from 3Rivers Archery
Q: Will this work on my hoyt dorado? Asked on 6/3/2012 by hoyt bow hunter ks from wichita ks Know the answer? Answer this question 2 answers A: It should work on your hoyt dorado, as long as the threaded hole is perfectly perpindicular to the limb itself. My Wes Wallace recurve has a slight angle to it, so I had to return the antler limb bolts. The bottom of the antler bur had a 1/8 inch gap and would not sit flush on the limb. Answered on 6/11/2012 by Anonymous A: No it will not work on the Dorado or the Buffalo. Answered on 6/5/2012 by Dave from 3Rivers Archery
Q: Have a Bear Bearcat T/D with thru the limb bolts. Bolts are 5/16x 18 thread. Bolts are nutted on the belly of the bow. If the antler bur bolts are the same thread then they should work, correct? Asked on 4/23/2012 by Rebeldog from Silver Springs, Fl Know the answer? Answer this question 1 answer A: Yes, if the bolts are of the same size they should be a great fit for your bow. Make sure to get the same length of bolt as what you have now. Answered on 4/24/2012 by Johnathan Karch from 3Rivers Archery
Q: Will these Trophy Bur Limb Bolts work on ILF type risers? Asked on 2/10/2012 by Anonymous Know the answer? Answer this question 1 answer A: These limb bolts will not work on the Dalaa ILF riser and most likely will not work on most others. Answered on 2/16/2012 by Dean from 3Rivers Archery
Q: I measured the limb bolt on my Samick Sage and its around 1.3 inches. Would you recommend the 1.5" or 1" limb bolt for the sage? Thank you Asked on 12/5/2011 by >>>------------> from Carrollton, TX Know the answer? Answer this question 2 answers A: I would go with the 1-1/2 inch bolt length on the Trophy Bur Limb Bolts for the Sage. Answered on 12/6/2011 by Shawn from 3Rivers Archery A: My jeffry was the same way. It fit fine. Answered on 1/13/2012 by Paul from Mississippi
Q: I have a wing chapparal bow with limb bushings. What is the tread count and bolt diameter for these and are they compatable with my wing? Asked on 11/30/2011 by Olcedar from Kent, Alabama Know the answer? Answer this question 1 answer A: The thread count and diameter are 5/16-18 and should be compatible with your Wing. Answered on 12/1/2011 by Shawn from 3Rivers Archery
Q: Question on Bolt length. Does it refer to total bolt length or length of the threaded portion. Ask this because part of the bolt length will be buried in the antlers. Asked on 11/27/2011 by Paul from Louisville, MS Know the answer? Answer this question 1 answer A: These are measured from the bottom of the antler that will rest on the limb to the tip of the bolt. Answered on 12/2/2011 by Art from 3Rivers Archery
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
