|
|
 |
Ace 2-Blade Glue-On Broadheads |
|
|
Item Number: 4926X
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: What model of adaptor do i need to put these broadheads with some 150 heritage express? I need a field point setup that would be a perfect match in grain; What pieces sould i look for (screw-in/glue-on and witch ones...)? thanks Asked on 5/6/2013 by sam from canada Know the answer? Answer this question 1 answer A: I would put the 5198X 11/32 short broadhead adapters, you wont be able to notice the 7 grain difference. Answered on 5/6/2013 by Dave from 3Rivers Archery
Q: Will a 11/32 wooden arrow fly well with these in a 160 grain Asked on 3/25/2013 by That One Guy from California Know the answer? Answer this question 5 answers A: I suggest you use the 125 grain.BestOnur Answered on 3/27/2013 by Aruno from Istanbul A: Fellow Archer, The ballistic quality and efficiency of an 11/32" cedar or fir shaft with the Ace 160 gr. head depends on the fletching used and the weight of the bow. I use 3, 5-inch parabolic feathers with a straight or helical fletch to give the arrow some spin and stability. I use 45# and 50# Martin X-200 recurves. For heavy broadheads some weight behind the arrow is required for range and penetration on deer, pig and black bear. Remember: Razor-sharp broadheads give you the equivalent of another 5-10 lbs. of penetration on big game animals. I've used Ace broadheads for decades. They are great. Good hunting, William C. LevensonCarlsbad, CA Answered on 3/26/2013 by Mr. Bill from Carlsbad CA A: Depending on what pound of bow and arrow spine you shoot. Answered on 3/26/2013 by Clint from 3Rivers Archery A: As long as the arrow shafts are spine weighted to your bow they should fly just fine. Answered on 3/25/2013 by Joseph the bold from Jeffersonville n.y. A: It depends upon the weight of the bow and if. Yu tune the arrow but most likely yes. Answered on 3/25/2013 by Anonymous
Q: Can you sharpen this Ace broadhead with a KME broadhead sharpener? Asked on 10/21/2012 by Mike from Great Falls, MT Know the answer? Answer this question 2 answers A: Yes the KME sharpener will work well with this broadhead Answered on 10/22/2012 by Dave from 3Rivers Archery A: ;Yes, a KME will work fine with the Ace head. I don't use it on mine as they are easy to sharpen the old fashion way. I use a stone and finish up with ceramic sticks. Hair popping sharp! That's one thing I like about these heads is how easy they are to sharpen. Sent from my U.S. Cellular® smartphone Answered on 10/21/2012 by Anonymous
Q: How much does this broadhead weigh? Asked on 9/25/2012 by Frankie from Staunton, VA Know the answer? Answer this question 5 answers A: You have the option between 125 grains or 160 grains. Answered on 9/28/2012 by Justin from 3Rivers Archery A: The Ace Standards are listed at 125 and 160 grains. The 160's I have were all within 2-3 of 160 grains as measured on a scale. Balanced superbly on aluminum adapters and fly extremely well out of my K Mag's (29" 2117 with 4" 4 fletch). Answered on 9/27/2012 by Anonymous A: Frankie, I use the 160 gr. on the 3 rivers POC arrows they fly great, easy to sharpen and penetration is excellent. They are also available in 125 gr. shoot Straight } - - - >>-----------> Steubenville Answered on 9/26/2012 by Anonymous A: You can select either 125 grains (0.2857 ounces) or 160 grains (0.3657 ounces) Answered on 9/26/2012 by Anonymous A: It weighs 125 gr or 160gr. I use the 125gr, my field points are also 125 gr. Good Luck have fun! Answered on 9/25/2012 by Anonymous
Q: Do they come pre sharpened? Asked on 6/23/2012 by Llamma from Klamath Falls,OR Know the answer? Answer this question 1 answer A: They are factory ground. You will need to do some touch up work and pull the burs off before they will be usable. Answered on 6/25/2012 by Justin from 3Rivers Archery
Q: is it only one Broadhead? Asked on 10/26/2011 by Anonymous Know the answer? Answer this question 1 answer A: Available in 6 pack only. Answered on 10/27/2011 by Shawn from 3Rivers Archery
Q: will these fit 5/16 wood shafts ? Asked on 4/6/2011 by Fellow from missouri Know the answer? Answer this question 1 answer A: They will overlap the shaft a little but, you should not have a problem with flight. Answered on 4/7/2011 by Justin from 3Rivers Archery
Q: What size shafts do these glue too?? i have XX75 Gamegetter 500 spline or 2016 shafts and im looking to see if i need the 5/16 or the 11/32 adapters Asked on 9/6/2010 by Dracon from NorthWest River, NL Know the answer? Answer this question 3 answers A: The Ace 2-blade broadhead is a 11/32" diameter. I would recommend getting the 11/32" adapters for a secure fit. Answered on 9/7/2010 by Johnathan Karch from 3Rivers Archery A: either will work Answered on 1/10/2011 by sam murray from wv A: 11/32" are the perfect fit. Answered on 1/25/2011 by mountain man from Bremerton, WA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
