|
|
 |
Brass Point Inserts |
|
|
Item Number: 0255X
|
|
Price: $13.99 - $17.99
(Depending upon options selected.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: Which one do I need for the Easton ST excel arrows. Asked on 5/21/2013 by tstick from texas Know the answer? Answer this question 2 answers A: They do not make a brass insert for this size of shaft. Answered on 5/22/2013 by Clint from 3Rivers Archery A: The ST excel uses the "H" size nock. You would need the brass insert listed as Item # 6759-3. I would first confirm this with 3Rivers customer service. 37Ranger Answered on 5/21/2013 by 37Ranger from New Mexico
Q: What size will fit carbon tech cheetah 300 spine? Asked on 3/26/2013 by hi Know the answer? Answer this question 1 answer A: You will want to get the 5/16 size. Answered on 3/26/2013 by Clint from 3Rivers Archery
Q: I have xx75 500 aluminums - how close would 100grn inserts bring their spine to that of 600s Same question regarding Trad Only 400s to 500 spine Looking to use extra arrows with other bows to not have to buy new Asked on 3/6/2013 by Doc from Sheldon ,Vt Know the answer? Answer this question 2 answers A: It will depend on a couple other factors besides just the weight of the point. I would recommend getting a field point test kit and using the different weights to figure out what you need to get the arrows to fly out of your lower weight bow. Answered on 3/7/2013 by Justin from 3Rivers Archery A: Try Stu's Calculator V.2 online....it is a great Excel based program were you can enter all of your variables an come up with the perfect setup to fit your needs. It is only as good as the accuracy of input information though so take the time to be exact. Also calculates FOC%, estimated FPS and total grn weight...and it's free....down load the accompanied instructions as well. Good luck & tight groups! Answered on 3/6/2013 by Anonymous
Q: Would any work in a 2115 shaft Asked on 3/2/2013 by bigdog from Gillespie IL. Know the answer? Answer this question 1 answer A: No, we do not have any brass inserts for 2115's. Answered on 3/4/2013 by Justin from 3Rivers Archery
Q: I have 5/16th fiberglass arrows. The tips are blunt. (Non-drilled). Am I supposed to drill them and use inserts? If so, will any of these work? Asked on 2/28/2013 by David from Marietta, GA Know the answer? Answer this question 3 answers A: I'm not sure if they will work or not we haven't ever try anything like this before. Answered on 3/1/2013 by Clint from 3Rivers Archery A: Those kind of arrows won't work very well with these.... probably best to give 3 Rivers a call and let them match up your needs with the proper equipment safely. Answered on 2/28/2013 by Taz from E TN A: if the arrows are solid fiberglass, chances are , they re fishing arrows , so , no , dont drill them, look into the various fishing heads, they use a type of outsert that that installs over the shaft. Answered on 2/28/2013 by Anonymous
Q: How many in the pack, 1 doz? Asked on 2/28/2013 by Jim from Oklahoma Know the answer? Answer this question 1 answer A: They come in a dozen. Answered on 3/1/2013 by Clint from 3Rivers Archery
Q: Will Brass inserts .246 (5/16" Easton/Beman/GT) work with a 500 spine Easton traditional arrow. Asked on 2/21/2013 by Wendy from Excelsior Springs,MO Know the answer? Answer this question 2 answers A: Yes the .246 brass inserts are what you will need for your arrows. Answered on 2/21/2013 by Art from 3Rivers Archery A: The .246 inserts will fit the .500 spine Traditional Only shafts. Answered on 2/21/2013 by Chris from Independence, Ks
Q: Which, if any, of these inserts would fit my 2018 Easton Legacy arrows? It says they are 5/16 inch under "point" on your website. Asked on 1/30/2013 by Jake Know the answer? Answer this question 1 answer A: We do not carry any brass inserts that will fit into the 2018's. Answered on 1/31/2013 by Justin from 3Rivers Archery
Q: I recently purchased 100g inserts for 2016 alum shafts . My question is the 3/16" shoulder on the inserts that extends in front of the arrow shaft. Should that 3/16" of insert be considered as part of the arrow shaft when cutting the shaft to length or should the shaft be measured from behind the insert ? Asked on 1/12/2013 by rick from St. Louis,Mo. Know the answer? Answer this question 1 answer A: I do not count the insert as part of the arrow length and I would not recommend doing so. That small amount up front should not change the impact of the shaft at all. And different inserts will have different thicknesses. It would make it more complicated to set up arrows in the future. Answered on 1/15/2013 by Justin from 3Rivers Archery
Q: Will the 340/300 spine size inserts fit a gamegetter II XX75 2216 shaft? Asked on 1/10/2013 by Jason from Las Vegas Know the answer? Answer this question 3 answers A: No, we do not have any brass inserts that will fit a 2216. Answered on 1/11/2013 by Justin from 3Rivers Archery A: Jason My first reply to your question was based on the inserts that I have used. The 300/340 inserts are listed for 2315 and 2317 shafts, so they will be too big for 2216 shafts. The inside diameters for the 2315 and 2317 shafts will be 0.329 and 0.325, but the 2216 I.D. will be 0.311. Mike Sent from my iPad Answered on 1/10/2013 by Anonymous A: Jason I use the 100 gr. brass inserts for carbon shafts, but they are way too small in diameter for 2216 aluminum shafts. Mike Sent from my iPad Answered on 1/10/2013 by Anonymous
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
