|
|
 |
Hickory Dimensional Lumber |
|
|
Item Number: 8569
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: Does it already follow a single growth ring? Or will it need to be worked? Asked on 5/8/2013 by noobowyer from oklahoma Know the answer? Answer this question 1 answer A: No, it does not follow a growth ring. This product is dimensional lumber. It will need to be backed to make a bow with it. Answered on 5/8/2013 by Justin from 3Rivers Archery
Q: Could I use this for recurve if I had a strong backing? I.e. sinew or fiberglass? Asked on 5/8/2013 by noobowyer Know the answer? Answer this question 1 answer A: You can use this wood to make a bow, but it will need to be backed. Answered on 5/8/2013 by Justin from 3Rivers Archery
Q: is the hickory kiln dried or air dried? And what are the actual dimensions?(is your 1" an actual inch?) Asked on 3/26/2013 by HeavyWing from Southeast,Michigan Know the answer? Answer this question 1 answer A: The hickory is air dried and it is 1 '' thick. Answered on 3/26/2013 by Clint from 3Rivers Archery
Q: Is the quality good enough for me to take it to a bandsaw and cut thicker backings for warbows? ie, 1/4" thick backings. Asked on 6/28/2012 by MrWarSpoon from Ohio Know the answer? Answer this question 1 answer A: Yes Answered on 7/3/2012 by Dave from 3Rivers Archery
Q: How should I decide the start demensions for a Andaman-Holegaard bow? I plan to make it 64" long,8" handle section,and 6" from the center of the bow to the limb fades.The bow will hopefully be 30lb.@26".I am using Red oak. Asked on 5/21/2012 by stickslinger from Macon Ga Know the answer? Answer this question 1 answer A: Make everything larger than you intend to have it when you are done. You can always remove material from the bow to get it down to where it needs to be. Answered on 5/31/2012 by Justin from 3Rivers Archery
Q: Could you use a linen backing? Asked on 1/31/2012 by John from Smithville, Mo. Know the answer? Answer this question 1 answer A: Yes linen would be an approriate backing material for a Hickory bow. Answered on 2/2/2012 by Dean from 3Rivers Archery
Q: Does this wood have good enough grain to make a solid bow from and if so, what would possibly be max draw weight from it? Asked on 12/9/2010 by 64mech2010 from Alabama Know the answer? Answer this question 2 answers A: The Hickory Dimensional Lumber requires a backing material as the grain is not consistent enough to handle the stresses of bending without a backing material. I would not try it without as more times than not, it will break even at low weights. Answered on 12/29/2010 by Johnathan Karch from 3Rivers Archery A: This wood could be used as a solid bow. The draw weight would depend on what type of style you use. For example a pyramid or flat bow design. The draw weight would range from 40 to 60 depending on the design. Answered on 11/8/2011 by Bow hunter from Hurt, VA
Q: Why is backing required? Im looking for hickory lumber like this to form my own bow from. Is the grain not good enough? Asked on 12/4/2010 by NewBowyer2011 from Alabama Know the answer? Answer this question 1 answer A: The grain has run out so it is not solid enough on its own to make an acceptable bow. It requires some form of backing to handle the stresses a bow is put through during the shot sequence. Answered on 12/29/2010 by Johnathan Karch from 3Rivers Archery
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
