($0.00 / 0 items)

Bows>Bow Building>Backing & Lumber

Osage Bow Building Lumber 5/8" x (68"-72")

Item Number: 4428

Price: $54.95

QTY

>Add to Cart

Add to Wish List

Full Product Info

Product Ratings & Reviews

Ask A Question


		Do you have questions about this product? Ask a question get answers from real customers and in-house experts with AnswerBox. 20 Questions \| 21 Answers Displaying questions 1-10Previous \| Next » Q: if i put a bamboo backing strip on this will it need to be cut thinner than 5/8 before i start tillering Asked on 1/9/2013 by sam from iowa Know the answer? Answer this question 1 answer A: More than likely you will need to remove more material than if you just used the osage, but I would recommend removing the material during the tillering process as opposed to before you start tillering. That way you can make sure that you do not remove too much material. Answered on 1/10/2013 by Justin from 3Rivers Archery Q: Do you have any other woods to work with? I would like to make a Yew self-bow. Also, do you carry this lumber in thicker specs? Such as 1" thick or more? Asked on 10/29/2012 by Rich from Fort Wayne, IN Know the answer? Answer this question 1 answer A: The only other wood we offer for building a bow is Hickory board lumber. Unfortunately we do not have any wood that is 1'' thick. Answered on 10/30/2012 by Art from 3Rivers Archery Q: Why these Osage lumber isn't flat sawn? Asked on 10/25/2012 by L from Missouri Know the answer? Answer this question 1 answer A: Our supplier does not make these specifically for archery. There are a limited amount of suppliers out there, and this is the best osage lumber that we have been able to find. Answered on 10/25/2012 by Justin from 3Rivers Archery Q: Can you use this lumber to make a reflex/deflex bow if you back it with glass or bamboo and use a form like the ones sold with your bow kits? Asked on 9/9/2012 by keithg27 from davis ca Know the answer? Answer this question 1 answer A: This is a very thick piece of wood to make a laminated bow with. This is better suited for a single backing or a board bow. Answered on 9/11/2012 by Justin from 3Rivers Archery Q: what does it mean while tillering when they say that the bow has a hinge flaw or default? Asked on 8/30/2012 by rusty from Portsmouth Ohio Know the answer? Answer this question 1 answer A: A hinge is a section of the limb that is bending a lot more than the rest of the limb. To remove the hinge you will have to tiller the rest of the limb to match the hinge to even it out. A hinge will make you drop your weight in the bow since you now have to remove more wood. Answered on 9/5/2012 by Art from 3Rivers Archery Q: when tillering this osage wood is it recommended to put a backing on it while you are doing it? Asked on 8/30/2012 by rusty from Portsmouth Ohio Know the answer? Answer this question 1 answer A: You will want to install the backing before you start tillering. If the backing is not installed before even floor tillering a piece of lumber the piece will be more likely break on you. Answered on 9/5/2012 by Art from 3Rivers Archery Q: can i back these osage boards with linen as backing? Asked on 2/2/2012 by booger from virginia beach, virginia Know the answer? Answer this question 1 answer A: Yes, If applied correct you can back this Osage with a linen backing. Answered on 2/7/2012 by Art from 3Rivers Archery Q: Should I taper and work the bow before or after I glue on my backing? Asked on 12/19/2011 by Peter from AZ Know the answer? Answer this question 2 answers A: I would glue them both up at the same time and then cut your profile and shape. Answered on 12/20/2011 by Shawn from 3Rivers Archery VERIFIED BUYER A: It's optional man how ever you think it would look Nicer, once it's backed you can work the bow and It will look better because you can see where the back Joins the core but it looks like one solid peace so it gives It a good finish , hope this helps good luck with your bow Answered on 1/10/2012 by Lukas from Morley michigan Q: What tools do you recommend shaping this with? Asked on 12/18/2011 by Peter from AZ Know the answer? Answer this question 1 answer A: Some common tools needed for building this type of bow would be a tillering stick, rasp, scrapers, glue and a good DVD. http://www.3riversarchery.com/Bow+Building+Tools++Tillering+Stick+building+tool_c49_s217_p0_i8499_product.html http://www.3riversarchery.com/Bow+Building+Tools++Toothing+Scraper+Making+Tool_c49_s217_p0_i8561-2_product.html http://www.3riversarchery.com/Bow+Building+Tools++Nicholson+%2349+%26+%2350+Bowmaking+Rasps_c49_s217_p0_i9949X_product.html http://www.3riversarchery.com/Bow+Building+Tools++Scraper+Set_c49_s217_p0_i5980_product.html http://www.3riversarchery.com/Bow+Building+Glue+%26+Adhesives++Urac+185_c49_s199_p0_i4430_product.html http://www.3riversarchery.com/Books+DVD%27s+Bow+Building+Making++The+Easy+Way%2C+DVD_c42_s33_p287_i8566_product.html Answered on 12/20/2011 by Shawn from 3Rivers Archery Q: this is where i'm confused. my question: should the bow be "backed" before shaping and tillering? Asked on 12/14/2011 by bluesmachine from rumford, me. Know the answer? Answer this question 1 answer A: Yes, I recommend that you back the bow before the tillering process. That will give you a more accurate account of the weight as you work on the bow. Answered on 12/15/2011 by Justin from 3Rivers Archery Displaying questions 1-10Previous \| Next » Ask a question Do you have a question about this product?

		May We Suggest..


		Hickory Backing


		Hickory Dimensional Lumber


		Osage Bow Building Slats 5/8" x 38"


		Osage Bow Handle Blanks


		Bamboo Backing


		Longbow Risers - 17"


		Bow Laminations