Visitor Monitoring
blank
blank
Arrows & Shafting>Arrow Building>Stains & Sealers
blank
Fletch-Lac Clear Sealer
blank

Fletch-Lac Clear Sealer

blank
Item Number: 4108X
blank
Price: $16.99 - $31.50
(Depending upon options selected.)
Flammable
 This item is Made in the USA    
blank
  
blank
blank
 Type:
 
 Size:
 
blank
 QTY   >Add to Cart    Add to Wish List
blank
blank
Full Product Info blank Product Ratings & Reviews blank Ask A Question
blank
blank blank blank blank blank
blank blank

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

8 Questions | 23 Answers
Displaying questions 1-8
  • Q:

    Is this needed to seal fletchlac paint on carbon arrows?
    Asked on 7/29/2014 by Bryan from United States

    2 answers

    • Staff Reviewer

      A:

      No, you really should not have to use the sealer on carbon arrows.

      Answered on 7/30/2014 by Sam from 3Rivers Archery
    • VERIFIED BUYER

      A:

      The fletch-lac was a lot thinner than I was expecting and took several coats. Also, it softened any cresting so that the squeegee smeared the cresting.
      Sent via the Samsung GALAXY S®4, an AT&T 4G LTE smartphone

      Answered on 7/30/2014 by Anonymous
  • Q:

    i have made a dipping tube with pvc pipe and reducer fitting..can i store super coat fletch lac in it ?
    Asked on 12/7/2013 by snagger from long island ny

    3 answers

    • Staff Reviewer

      A:

      PVC tubing will work for short term usage but I don't recommend storing Fletch-Lac Sealer long term in PVC pipe.

      Answered on 12/12/2013 by Keith from 3Rivers Archery
    • VERIFIED BUYER

      A:

      I wouldn't. They sell plastic tubes for that.

      Answered on 12/7/2013 by Anonymous
    • VERIFIED BUYER

      A:

      Never tried it....but would think that after a while, the laquer would get to the PVC glue, and dissove it.

      Answered on 12/7/2013 by Bill from Illinois
  • Q:

    Cannot be used with gasket systems. Drip dry only.

    A few has reponded that they're using it in dip tube system..

    So what give here?
    Asked on 4/27/2013 by yanow from Missouri

    3 answers

    • VERIFIED BUYER

      A:

      All I know is that I have used it with a gasket for many years. works just fine. usually 4 to 6 passes or coats, whatever you want to call it
      Sent from my iPhone

      Answered on 4/27/2013 by Anonymous
    • Staff Reviewer

      A:

      this lacquer is not meant to be used with the gasket system, but it has been done before and it has worked. Normally you will need to thin the lacquer more in order for the gasket system to work.

      Answered on 4/29/2013 by Justin from 3Rivers Archery
    • VERIFIED BUYER

      A:

      Dear Shopper,
      There are several different "families" of lacquer and glue products.
      You may want to review the chart at
      http://search.3riversarchery.com/nav/cat1/arrowsshafting/cat2/arrowsshafting
      _arrowbuilding/cat3/arrowsshafting_arrowbuilding_gluestape/0
      The different families are not compatible with each other-so use the ones
      that go together. I use fletch lac to coat the arrows using a big dipper
      and dripping dry; then use fletch-tite to glue down the fletches.
      The "gasket lacquer" compatible systems often allow you to "scrape off" the
      excess lacquer, rather than dripping dry. There is even a device with a
      hole punched in it to help you remove the excess gasket lacquer. Don't use
      this method with fletch lac.
      Yours,
      Jay Ter Louw

      Answered on 4/29/2013 by Anonymous
  • Q:

    I'm just dipping my toe into making wooden arrows. Hate to buy a bunch of product(s) til I know if I'll be staying with it. Can this or any other sealer be effectively brushed on (to avoid buying dip tanks right now)? BTW, I usually use fletch tite for fletching (adhesion issue?).
    Asked on 2/8/2013 by Lee from Western Kentucky

    5 answers

    • VERIFIED BUYER

      A:

      Yes, but the finish won't be as smooth
      Sent from my iPhone

      Answered on 2/8/2013 by Anonymous
    • VERIFIED BUYER

      A:

      I¹m sure you could brush it on. I would just hit it with some steel wool
      after it dries. I use fletch-tite also and love it.

      Answered on 2/8/2013 by Anonymous
    • VERIFIED BUYER

      A:

      Buying an inexpensive full length dip tube will be well worth the money. Most lacquer will be next to impossible to bush on evenly. I had one in my barn for ten years and was able to pull it out and use it again, once you buy it you will have it forever.
      I use Fletch Tite and have very good results.
      Happy arrow building,
      Andrew
      Canandaigua, NY

      Answered on 2/8/2013 by Anonymous
    • Staff Reviewer

      A:

      Yes, you can brush or rub on this finish. It will not be as smooth as if you would have dipped them, but it will work just fine. All of the Bohning products work best together. If you use this sealer then I would recommend the Fletch Tite Platinum.

      Answered on 2/9/2013 by Justin from 3Rivers Archery
    • VERIFIED BUYER

      A:

      You can brush it on, (I would use a brush with very "fine", as opposed to
      "coarse" bristles. You still run the risk of streaks in the finish.
      Fletch-Tite is compatible with Fletch-Lac, so adhesion should be OK.

      Answered on 2/9/2013 by Anonymous
  • Q:

    Can this product be used in the plastic big dipper, or only with a metal dip tube.
    Asked on 2/1/2013 by Chrism from Broaddus Texas

    5 answers

    • VERIFIED BUYER

      A:

      Fletch-Lac can be used in the plastic dip tubes, i have been using it that way for years and never had a problem.

      Answered on 2/5/2014 by Anonymous
    • VERIFIED BUYER

      A:

      I use a plastic dip tube so I can see the depth I am dipping to. This is my preference and it works well.
      Good luck,
      Andrew

      Answered on 2/2/2013 by Anonymous
    • VERIFIED BUYER

      A:

      That's what I use it with.
      Sent from my iPhone

      Answered on 2/2/2013 by Anonymous
    • VERIFIED BUYER

      A:

      Fletch-Lac is perfectly compatible with the plastic big or little dipper.
      It can even be stored in the dip tube when you're done using it.

      Answered on 2/2/2013 by Anonymous
    • Staff Reviewer

      A:

      Yes, this product can be used with, and even stored in, the plastic dip tubes.

      Answered on 2/4/2013 by Justin from 3Rivers Archery
  • Q:

    What is the shelf life of the Clear and Blue Clear Bohning sealer? I recently bought a qt of each and when I stirred it it was a gel like substance. Even after adding Bohning thinner it remained the same and I was unable to "dip" my wooden shafts. Is there anything I can do to liquify either as they're certainly not cheap and I hate to throw them away. Any suggestions would be appreciated, outside of buying more. Thnx!
    Asked on 10/2/2011 by bowdad from Tipton, MO

    2 answers

    • A:

      yuu cant restore them from this state. however in the future,store them in a cool dry place with low light and low humidity.

      Answered on 7/3/2012 by smitty from mcomb,miss
    • Staff Reviewer

      A:

      The thinner is the only way to thin them out. Try warming up the cans and then trying to mix in the thinner. Not high heat or anything, just enough to soften it a little. That will help it to mix with the thinner.

      Answered on 10/7/2011 by Justin from 3Rivers Archery
  • Q:

    I am learning to make my own arrows, so I am wondering do I need to seal my arrows before, after, or at all if I am putting on shaft and crown dip lacquer? Thanks.
    Asked on 7/4/2011 by Iceman from Northfille, NY

    2 answers

    • A:

      sand,straighten and seal. then crown dip and crest. dont seal over the crest.

      Answered on 7/3/2012 by smitty from mcomb,miss
    • Staff Reviewer

      A:

      As long as they will have a coat of lacquer on the outside, you should be fine.

      Answered on 7/22/2011 by Justin from 3Rivers Archery
  • Q:

    I have problems with the Fletch-Lac super coat. I come up with some bumps that I have to sand down after the shaft drys. What can I do to eliminate the bumps?
    Asked on 5/12/2011 by WyoArcher from Laramie WY

    1 answer

    • Staff Reviewer

      A:

      There are a few different things that it could be. Give us a call at 1-866-587-9501 and we will be more than happy to help.

      Answered on 5/13/2011 by Justin from 3Rivers Archery
Displaying questions 1-8

Do you have a question about this product? 

blank blank
blank blank blank blank blank
blank
blank
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams Click to verify BBB accreditation and to see a BBB report Trust Us Facebook page for 3Rivers Archery YouTube videos for 3Rivers Archery Google+ page for 3Rivers Archery
 
blank
 
 Customer Service    About Us    Product Details    Extra Features    Top Categories
 866-732-8783
 Info@3RiversArchery.com

 My Account 
 Check Order Status 
 Shipping Information 
 Return Policy 
 Privacy Statement 
blank
 3Rivers Archery
 PO Box 517
 607 HL Thompson Jr Dr
 Ashley, IN 46705

 Request a Catalog 
 Learn More About Us 
blank
 Top Searches 
 Gift Certificates 
 Dealer Information 
blank
 Email Sign Up 
 Trophy Room 
 3D Shoots 
 Arrow Whiz 
 Military Discount 
Read Our Blog
blank
 Kid bow sets 
 Recurve bows 
 Longbow bows 
 Carbon arrows 
 Wood arrows 
 Broadheads 
 Youth Archery 
blank
©2014 Three Rivers Archery Supply, Inc. All Rights Reserved.
No part of this web site may be copied or reproduced without the express written permission of Three Rivers Archery Supply, Inc.
3RiversArchery.com
Ask The Experts info@3riversarchery.com Ask the Experts at 3Rivers Archery
Search
Blank space
Order Status Gift Cards Free Catalog Customer Service Sale Items 3Rivers Archery Customer Service and Sale Items
Sign In 3Rivers Archery Welcome and Sign In
($0.00 / 0 items) View Cart at 3Rivers Archery
Background Blank
100% Satisfaction Guarantee 3Rivers Archery 100% Satisfaction Guaranteed
3Rivers Archery leads the Industry with Experience, Knowledge, and American Product Selection