|
|
 |
Zwickey Eskilite 2-Blade Screw-In Broadheads |
|
|
Item Number: 4221-1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: I shoot Beman Center Shot arrows. Can I shoot these broadheads on my arrows due to my arrow diameter being smaller? Asked on 2/24/2013 by Deeter from Bunker Hill, IN Know the answer? Answer this question 1 answer A: Yes they will work just fine. Answered on 2/25/2013 by Clint from 3Rivers Archery
Q: will the zwickey fit my carbon shaft Asked on 12/11/2012 by xxxxxx from Va Know the answer? Answer this question 1 answer A: This broadhead will fit all standard sized inserts. As long as you are not shooting any of the new Deep Six components from Easton this broadhead will fit your inserts just fine. Answered on 12/12/2012 by Justin from 3Rivers Archery
Q: I am sorry I think I should have been a little bit more precise. I am using a Samick Sage 45lb... I might even be using the wrong arrows (Easton Fall Stalker 2117s) cos I found them and they were affordable. I use them un-cut at factory length and don't have a huge problem with accuracy. I have heard that using a heavier tip (broadhead, fieldpoint ect) increases the dynamic deflection. Would these broadheads work? I don't have a lot of moneys which is why I find the Zwickey so alluring. If I had 1000 dollars I would order a dozen custom arrows lol. Asked on 11/16/2012 by shamrock from Roswell, GA Know the answer? Answer this question 1 answer A: Yes, these broadheads will work. They should fly close to the same as a 125 grain field point. If you want to increase the weight, I recommend looking at a Delta. Answered on 11/16/2012 by Justin from 3Rivers Archery
Q: Can these heads be used on an uncut (factory length aluminum arrow) I use a 45 samick sage. Asked on 11/15/2012 by shamrock from Roswell, GA Know the answer? Answer this question 2 answers A: Yes they can be used on any arrow cut or uncut. Length of an arrow is related to spine of the shaft - short arrows are stiff and longer arrows are weaker. The Samick "Sage" is cut to center (according to my Sage)..... .500 spine arrows work great with my 45# and 50# limbs. Answered on 11/15/2012 by ~kp from Bronx, NY A: Yes, these broadheads will screw into any standard sized insert. Answered on 11/15/2012 by Justin from 3Rivers Archery
Q: What is the best way to sharpen these? My KME isn't doing it at all. Maybe a bench grinder? Asked on 10/14/2012 by EJK Know the answer? Answer this question 1 answer A: They are originally sharpened on a bench grinder. I recommend either using a file or a flat stone. They will take a little effort to get hunting sharp, but they are one of the more durable heads out there. Answered on 10/15/2012 by Justin from 3Rivers Archery
Q: Does this broad head come in a Single Bevel? Tonto Point? Asked on 9/21/2012 by Paul from United States Know the answer? Answer this question 1 answer A: No, it is only double bevel no Tonto point. Answered on 9/25/2012 by Dave from 3Rivers Archery
Q: Hi, I was wondering what the cutting breadth of these broadheads is. My province requires a minimum breadth. Thanks! Asked on 11/4/2010 by Cliff from Nova Scotia Know the answer? Answer this question 2 answers A: The cut width on the Eskilite 2,4 Blade Broadheads is a 1-1/16. Answered on 11/5/2010 by Shawn from 3Rivers Archery A: 1 1/16 inches.... Answered on 10/12/2011 by Big D from Boones Mill, VA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
