|
|
 |
Selway Bolt-On Takedown 5-Arrow Bow Quiver |
|
|
Item Number: 5095X
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: Would this fit nicely on a PSE Stalker? Asked on 4/22/2013 by Garrus Vakarian from Julian, CA Know the answer? Answer this question 1 answer A: Yes it will fit that bow just fine. Answered on 4/23/2013 by Clint from 3Rivers Archery
Q: Will this quiver fit my Stalker stealth T/D recurve? Asked on 3/26/2013 by Rossco from Australia Know the answer? Answer this question 1 answer A: From I can tell it will fit that bow just fine. Answered on 3/27/2013 by Clint from 3Rivers Archery
Q: Will this work with a Dave bower silver tip takedown recurve with antler bolts Asked on 2/6/2013 by Keith from Cookeville tennessee Know the answer? Answer this question 1 answer A: As long as it is a take down bow and the limb bolts are in the correct spot then you should not have any problems. I do not have a Silver Tip here to be able to measure and double check. Answered on 2/7/2013 by Justin from 3Rivers Archery
Q: Will this quiver work on the Tomahawk Legacy Series long bow? Asked on 9/3/2012 by rich from St Joseph, Mi Know the answer? Answer this question 2 answers A: Yes, This quiver will work with the Tomahawk 3 piece Legacy Longbow. Answered on 9/4/2012 by Art from 3Rivers Archery A: If it is a take down it will Sent from my iPad Answered on 9/5/2012 by Anonymous
Q: Will this work with carbon arrows? Asked on 7/14/2012 by Anon Know the answer? Answer this question 2 answers A: Yes, Selway only has one gripper size for their quivers. It will work on all shafts down to 5/16. Answered on 7/17/2012 by Justin from 3Rivers Archery A: Good morning, With this quiver, it shouldn't matter as long as your carbon arrows have standard shaft widths - the base will hold them fine, and the upper guide accommodates most variety of shaft sizes..I have carbon shafts with two blade broad-heads, and this is perfect! Answered on 7/16/2012 by Anonymous
Q: Will this work with antler limb bolts? Asked on 7/7/2012 by Caleb from Bedford indiana Know the answer? Answer this question 1 answer A: Yes this quiver will work with the Antler Limb bolts. Answered on 7/10/2012 by Art from 3Rivers Archery
Q: Will this quiver work on a Hoyt Buffalo? Asked on 7/1/2012 by Archery Fanatic Know the answer? Answer this question 1 answer A: No the only quiver that will work is the Buffalo quiver. Answered on 7/2/2012 by Dave from 3Rivers Archery
Q: Will this work on a Samick Sage TD bow? Asked on 5/4/2011 by BMed Know the answer? Answer this question 1 answer A: This quiver is designed to go under the bezel of the limb. On the Sage limbs the bezel is attached to the limb and to a sleeve that goes through the limb bolt hole that are glued in so you will not be able to mount this quiver to the Sage. This bow was designed for a side mount quiver. The one I would recommend would be the Bohning Panther quiver. Answered on 5/5/2011 by Art from 3Rivers Archery
Q: I have a Samick Deer Master take down and was thinking of buying a Selway bolt on but discovered brass limb bushings cannot be removed. Has anyone an answer to this problem or are they just not compatable? Asked on 3/17/2011 by Anonymous Know the answer? Answer this question 1 answer A: They are just not compatible. Answered on 3/23/2011 by Justin from 3 Rivers Archery
Q: do you need longer limb bolts for this quiver to work? Thanks for the help! Charlie Asked on 10/18/2010 by Gen273 from KY Know the answer? Answer this question 1 answer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
