|
|
 |
Tred Barta Wilderness 8-Arrow Bow Quiver |
|
|
Item Number: 8310-2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: can you keep 1 or 2 arrows seperate from the rest ? Asked on 1/20/2013 by ryu from belgie Know the answer? Answer this question 1 answer A: The 8 arrow model you will have an arrow on each side of the hood, so there will be two arrows separate. Answered on 1/22/2013 by Art from 3Rivers Archery
Q: How do you remove hood foam? Where can I get the foam that will fit ? Asked on 7/27/2012 by stickslinger Know the answer? Answer this question 1 answer A: You should be able to pull the hood foam out. If not you can start removing pieces until it comes out. It should only be glued in with rubber cement. The Selway hood foam will fit the Barta Quiver. Answered on 7/31/2012 by Justin from 3Rivers Archery
Q: Does this work on left handed bow? Can this be installed on a left hand bow and still have the forward facing gripper (first arrow gripper) in the right direction? (without having to turn the gripper upside down)? Asked on 6/13/2012 by 657333 Know the answer? Answer this question 1 answer A: This quiver will work on a left handed bow. you can flip the leading gripper around to the other side to make it for left hand. Answered on 6/14/2012 by Art from 3Rivers Archery
Q: Will this work for Easton Axis 500 arrows? Asked on 6/13/2012 by fasdfasdfasdfasdfasdfasdfs Know the answer? Answer this question 1 answer A: Yes, This quiver will work with Axis arrows. You may have to angle the lower gripper so that it pinches the shaft tight. Answered on 6/13/2012 by Art from 3Rivers Archery
Q: How is it attached to the bow? And please send a piture the quiver empty because I am curious as to what it looks like empty. Asked on 6/7/2012 by stickslinger from Macon Ga Know the answer? Answer this question 1 answer A: This quiver will strap on to the bow. I do not currently have any pics of the quiver without arrows. It is very similar to the Selway quivers. It is a two piece quiver with leather on both pieces. Answered on 6/8/2012 by Justin from 3Rivers Archery
Q: Goldtip traditinals have an OD OD .311, my thoughts are they're to skinny. Is this the case for the gripper? Asked on 3/25/2012 by Anonymous Know the answer? Answer this question 1 answer A: The gold tips will fit in the Barta quiver. Answered on 3/27/2012 by Clint from 3Rivers Archery
Q: Will carbon arrows like the Carbon Express Heritage Arrows fit nicely in this quiver? Asked on 1/25/2012 by Mic from Michigan Know the answer? Answer this question 1 answer A: Yes, they will fit fine. Answered on 1/26/2012 by Dean from 3Rivers Archery
Q: What diameter arrows is this quiver capable of holding? Asked on 10/8/2011 by Nancy the Newbie from Barstow, Ca Know the answer? Answer this question 2 answers A: The gripper that comes with this quiver is made for 11/32 and 23/64 arrows. The replacement Selway gripper will work on this quiver but you will only be able to hold 6 arrows then. Answered on 10/10/2011 by Justin from 3Rivers Archery A: Well it is ment use with 11/32 and 23/64. Answered on 8/18/2012 by Stickslinger from Macon Ga
Q: I HAVE A Bear 48" super Mag recurve will this quiver work on it?? Also its a left handed bow.. is that ok also?? I just purchased this Quiver from you. I HOPE ITS OK TO USE ON THIS BOW.. Asked on 8/10/2011 by Dan from Tucson Arizona Know the answer? Answer this question 1 answer A: You should not have a problem attaching this to your Super Mag. If you have any problems give us a call at 1-866-587-9501 and we will help to get everything working. Answered on 8/11/2011 by Justin from 3Rivers Archery
Q: Will this quiver fit my 1969 Fred Bear take down? I have an A riser paired with the longest limbs (C-limbs). Asked on 4/24/2011 by Anonymous Know the answer? Answer this question 1 answer A: Yes, it should attach to your bow without any problems. Answered on 4/25/2011 by Justin from 3Rivers Archery
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
