|
|
 |
Hoyt Buffalo 4-Arrow Bow Quiver |
|
|
Item Number: 2525X
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: I have been trying the Easton fmj arrows. They do not fit in this quiver. Can I get an arrow holder for this quiver that will hold these arrows? Asked on 3/14/2013 by James from Lakeville Minnesota Know the answer? Answer this question 1 answer A: Unfortunately we do not have any replacement grippers for these quivers. You should not be having any issues with the FMJ because they are a 9/32 diameter and this is the size that Fred Eichler uses exclusively in this quiver. Answered on 3/20/2013 by Art from 3Rivers Archery
Q: Hi, Will the quiver fit on a Hoyt 30 Spyder? Asked on 12/30/2012 by Johnny Know the answer? Answer this question 2 answers A: Hi, I'm not positive, but I would doubt it. I think the Buffalo quiver was designed specifically for Hoyt's traditional bows with the metal riser (Buffalo, Dorado, Gamemaster II). Most Hoyt compound shooters that I've seen use a Fuse quiver on their bows. Good luck! Answered on 1/3/2013 by Bill from Oneonta, NY A: This quiver will only work on the Buffalo bow. Answered on 12/31/2012 by Clint from 3Rivers Archery
Q: I just bought this and it did not come with directions that were very clear. It came with two rods, one shorter than the other and did not say which one goes on the bottom and which on the top. So my question is does the longer rod that attaches the quiver to the bow go on the bottom part of the bow or the top? Asked on 7/22/2012 by RJ43 Know the answer? Answer this question 1 answer A: The longer of the two rods is for the top, hood portion, of the quiver. The shorter rod should be used to mount the gripper. Answered on 7/23/2012 by Justin from 3Rivers Archery
Q: Will any of the Hoyt one piece removable quivers work on the Buffalo. Is the triangle mount on the Buffalo able to accomodate any of Hoyt or Fuse quivers. Asked on 7/14/2012 by 65goat from Camby IN Know the answer? Answer this question 2 answers A: As far as I know the Buffalo quiver is the only one that will fit onto the Buffalo. I do not have any of the other quivers here to check if they will work. Answered on 7/17/2012 by Justin from 3Rivers Archery A: Oddly enough all of the new Hoyt bows are outfitted with the little triangle mounting holes for quivers and Mathews carries a one piece detachable quiver that fits these Hoyt bows. I have one on my Maxxis and one on my Buffalo. http://www.lostcamo.com/catalog/quivers_28/arrowweb-t-series-5-arrow-quiver_261 Answered on 8/29/2012 by 2ACR from Texas
Q: Is there a replacement hood foam available for this quiver? Asked on 3/5/2012 by Anonymous Know the answer? Answer this question 1 answer A: I do believe so. We currently do not stock it, but plan to in the near future. Answered on 3/6/2012 by Johnathan Karch from 3Rivers Archery
Q: How much does the Hoyt 2-piece Buffalo Bow Quiver weigh? Asked on 2/1/2012 by Grasshoppah Know the answer? Answer this question 1 answer A: The Buffalo Quiver weighs in at approximately 9 oz. Answered on 2/2/2012 by Dean from 3Rivers Archery
Q: Will this Quiver fit the Hoyt Dorado? Asked on 12/7/2011 by Joe from Babylon, NY Know the answer? Answer this question 2 answers A: Yes, it should mount up to the the Hoyt Dorado with out a problem. Answered on 12/8/2011 by Shawn from 3Rivers Archery A: Im sure you have an answer by now but, Yes it will fit the Dorado, and the same quiver will work for your right or left handed bow. A Good move by Hoyt. Answered on 12/15/2011 by stick from Poplar Bluff Mo.
Q: do u have them in 6 arrow and black Asked on 11/19/2011 by Anonymous Know the answer? Answer this question 1 answer A: We have the black quivers in stock, but they do not make a 6 arrow version. There is only the 4 arrow model. Answered on 11/22/2011 by Justin from 3Rivers Archery
Q: does this quiver come lefthanded Asked on 11/12/2011 by michael from wharton, Texas Know the answer? Answer this question 1 answer A: This quiver is ambidextrous. The bracket on the bottom has two gripper channels, one for LH and one for RH. The mounting bracket on the top can also be flipped to adjust for LH or RH. Answered on 11/12/2011 by Justin from 3Rivers Archery
Q: Will this quiver fit a Hoyt Compound Bow and will the hood cover the long Woodsman Broadheads? Asked on 11/9/2011 by Anonymous Know the answer? Answer this question 1 answer A: The hood has an angle to it. It will cover between about half of the Original Woodsman to three quarters of it. The packaging states that it will fit the Buffalo, Gamemater II, and the Dorado. I do not know if it will fit any of Hoyt's compounds. Answered on 11/10/2011 by Justin from 3Rivers Archery
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
