|
|
 |
Mystic Scraper |
|
|
Item Number: 6301
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full Product Info |
|
Product Ratings & Reviews |
|
Ask A Question |
|
|
|
|
|
|
|
|
|
|
|
Q: I purchased one of those and its very good , problem is am a newbie and i used sand paper to sharpen it and it started to fail ,how can i fix it and make it sharp as new ? Asked on 1/10/2013 by longbow freak from kuwait Know the answer? Answer this question 1 answer A: You can use a standard file or belt sander. You want to square off the edges perfectly perpendicular. Answered on 1/11/2013 by Justin from 3Rivers Archery
Q: I have this scraper and it works great, but how does one sharpen it? I have never sharpened a scraper before but after four bows, I think this one needs a tune up. Asked on 10/23/2012 by Bronson from PA Know the answer? Answer this question 1 answer A: Hold it flat on a belt sander and it will be good as new Answered on 10/23/2012 by Dave from 3Rivers Archery
Q: I own one of these scrapers that I purchased awhile back from 3Rivers. I enjoy using it and for the bows that I make, mostly elb style, it works quite well. Though I have yet to need to sharpen the tool, could someone please explain the exact process to put an edge back on this scraper? I am familiar with putting a burr on a traditional cabinet scraper. Thank you! Asked on 2/1/2011 by Analog Kid from Oklahoma Know the answer? Answer this question 2 answers A: You will rarely ever need to put a edge back on this scrapper due to the strength of the Stainles steel. When it does dull you will want to put an edge on it the same way as you do with a standard cabnit Scrapper you would just not need to burnish it. Answered on 2/3/2011 by Art from 3Rivers Archery A: Just use the same process...True the edge to make it perpendicular to the broad surface, then, push a burnisher along the edge at a 45 degree angle with heavy pressure parallel with the edge. It will curl a nice burr. The truing of the edge takes a little longer because the scraper is so thick. I use a sharpening stone for the truing. Answered on 8/7/2011 by JimHep from Riverside, CA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
