Customers most agreed on the following attributes:
Comments about Glue-In, Glue-On Broadhead Adapters:
The 2317 size broadhead adapters weigh exactly 32 grains as advertized. The problem is that the diameter of the insert portion of the adapter is much to small. The 2317 adapter is a perfect fit for a 2117. I'll call 3Rivers tomorrow and find out why.
Comments about Glue-In, Glue-On Broadhead Adapters:
was very pleased to find these for 2020 aluminum shafts, they fit well and weigh consistently
Comments about Glue-In, Glue-On Broadhead Adapters:
I thought these were the long adaptors I used to buy but the taper is too short for good alignment and support. A good side blow might nock a broadhead loose. Also the diameter is too small. My Zephyr's have an 11/32 diameter and these are about 5/16 diamter.
Comments about Glue-In, Glue-On Broadhead Adapters:
have only had the time to shoot them at targets but they fly well and there was very very minimal broadhead adjustment once the broadhead was pushed all the way on they lined up very nice.
Comments about Glue-In, Glue-On Broadhead Adapters:
This adapter fit perfectly with the Zwickey broadheads that I ordered and matched my arrows true and inline. I was impressed with the service from 3 Rivers Archery. So much so that I have already recommended you to my friends.
Thanks Again
Comments about Glue-In, Glue-On Broadhead Adapters:
This makes it great for using 2 blade broadheads that glue on.
Comments about Glue-In, Glue-On Broadhead Adapters:
I bought a pack of the broadhead adapters to try with some 2018 arrows I had. I mounted them with hot melt glue and then mounted 125grn Woodsman broadheads. they all spin true, and I even went stump shooting with a judo mounted on the adapters and had no problems with durability.p.s. I shot two whitetails on an out of state hunt with this setup and they held up great.
Comments about Glue-In, Glue-On Broadhead Adapters:
I find that using glue in broadhead adapters provide a "fail safe" broadhead set up. There is no chance of the broadhead coming loose in the quiver, I feel they also give a better arrow balance than using swaged shafts and also, when making a shot on an animal, there is less chance of any kind of failure over screw in heads.
Comments about Glue-In, Glue-On Broadhead Adapters:
I'm impressed with the fit to the Wensel Woodsman broadheads I'm using. There has never been a wobble to correct. I've removed broadheads that were damaged and the insert is still good. There is no worry that the head has, or will, unscrew and be loose.
Tags: Using Product
Comments about Glue-In, Glue-On Broadhead Adapters:
Have preferred swaged arrows in past times. Just what I was looking for with my new set of Legacy arrows. I believe my 2219's with 5" feathers are better balanced at 10% FOC when using 125 grain Zwicky or Bodkin broadheads
Comments about Glue-In, Glue-On Broadhead Adapters:
The glue-in, glue-on inserts provide a lot of versatility in terms of point weight. If you get a target arrow that shoots well with a 145 or lighter tip and standard insert, you can use the glue-in, glue-on inserts and an appropriate broadhead to match the weight.
Comments about Glue-In, Glue-On Broadhead Adapters:
I use glue-on adapters when making hunting arrows with glue-on broadheads because it does not increase the weight of the arrow : for my 2219 shafts, a broadhead adapter-long (42gr)+ aluminium insert 28gr) =70gr, a glue-on broadheads adapter=26gr.
A glue-on adapters has almost the same weight than an aluminium insert.
Comments about Glue-In, Glue-On Broadhead Adapters:
Reduces weight, so you dont have to use screw in adabter and insert, if weight is a concern.
Comments about Glue-In, Glue-On Broadhead Adapters:
I use these adapters for hunting, they make arrow to broadhead connection very solid. I have never had any problems, work great.