Customers most agreed on the following attributes:
[0 of 1 customers found this review helpful]
Comments about Clear Fiberglass:
I used the product to back a long bow I was making out of Wenge and wanted to be able to see the wood grain. The fiber glass I used worked very well and would recomend it to others. I am making four other bows at this time and will be using this product again in the near future.
Comments about Clear Fiberglass:
Product is comparable to others on the market, and competetively priced, but technical specs were somewhat lacking. Experience required to discern what you are purchasing.
Comments about Clear Fiberglass:
This product allows you to appreciate the beauty of wood while giving resistance.
[1 of 1 customers found this review helpful]
Comments about Clear Fiberglass:
I used this glass on a longbow I built. I have not had any problems with any glass I've bought from here. I would recomend it to anybody that wants to build a bow.
[1 of 1 customers found this review helpful]
Comments about Clear Fiberglass:
Used on laminated bow ( of course ) looked great after got out of hot box. Dark stained zebra wood shone beautifully through the glass. This is very accuratly on dimensions. If i have time later i'll post a pictue of finished bow in the section of longbow riser.
[1 of 1 customers found this review helpful]
Comments about Clear Fiberglass:
Clear glass allows the beauty of the wood to show through and adds strength to the bow.
[2 of 2 customers found this review helpful]
Comments about Clear Fiberglass:
I have used this fiberglass to make two different recurves. The fiberglass has a very consistent grain and no defects, no splits, no cracks, no warping. Not only does the transparency provide for a permanent way to preserve the beautiful grain of the limb woods, but it also is a good glass to use for beginners because it allows you to see if your lamination technique is leaving air bubbles or debris. No beginner should use any other fiberglass, period. As a side note, I used this product with the EA-40 Smooth-On Epoxy offered by 3R. Those two products were made for each other!
[1 of 1 customers found this review helpful]
Comments about Clear Fiberglass:
Excellent material, accurate in dimensions and easy to work with.
[0 of 1 customers found this review helpful]
Comments about Clear Fiberglass:
I built my first longbow using .050 glass and it was perfect glass. Exacting measurement.
Great shipping.
[1 of 1 customers found this review helpful]
Comments about Clear Fiberglass:
The glass I received is very clear with no streaking in it. Also consistent in thickness when miced piece to piece. Just what Im looking for for my laminated bows.
[3 of 3 customers found this review helpful]
Comments about Clear Fiberglass:
I find this product reasonably easy to use. I apply glue to one bow limb at a time, then roll the glass on. Then glue and roll the glass on the other limb. This prevents the formation of air bubble between stave and glass. Before glueing, we apply packaging tape to the outside. After the glue dries, excess glue is easily removed, wash down with acetone. This glass lets the wood grain show in all its glory.
[2 of 3 customers found this review helpful]
Comments about Clear Fiberglass:
Used on my first bow.