Print This Page
Customers most agreed on the following attributes:
from Naples, Italy on 8/29/2009
Comments about Powerbond Arrow Point Glue:
This stuff is worthless. The first time you stick and arrow point in a piece of wood and have to apply any force to remove the arrow the glue will fail and the insert will come out.
from Choctaw, OK on 7/26/2009
Comments about Powerbond Arrow Point Glue:
I bought the 2 oz bottle. The first time I tried to use it I discovered the bottle had dried completely through. I searched the knick-knack drawer and found a syringe style 2 part epoxy adhesive that I originally used over 10 years ago and used it with great results.
[3 of 3 customers found this review helpful]
Comments about Powerbond Arrow Point Glue:
I love this stuff for glueing anything that you want to stay put. It also has the plus that you can heat the point and remove it just like hot melt. I find it has way more holding strength than hot melt. The only down side is that you need to let it cure overnite, but thats not a problem if you are prepared. It really doesn't take much to do a great job. Only other down is that it will dry in bottle if you dont have the cap VERY tight.
[5 of 5 customers found this review helpful]
from Oregon on 11/29/2007
Comments about Powerbond Arrow Point Glue:
Used it to glue on broadheads and inserts. Strong but if you need to make some arrows in a hurry dont use this stuff. Ive seen wet cement dry faster in winter...Over the top, but you get my point!